• Tips for compiling software to gates (01/07/05) [ EDA/IP ]
• Bluetooth headset design—not just about chips (01/07/05) [ Interface ]
• DSC is an SoC innovation (01/07/05) [ EDA/IP ]
• Using multilevel cell NAND flash technology in consumer applications (01/07/05) [ Memory/Storage ]
• HSDPA worth the design hassles (01/07/05) [ Amplifiers/Converters ]

• Unclogging the pipeline toward 3G technology (01/07/05) [ RF/Microwave ]
• Implementing high-performance DSPs using low-cost FPGAs (01/07/05) [ Amplifiers/Converters ]
• Mixed-signal simulation in design, verification (01/07/05) [ EDA/IP ]
• Developing software for audio/visual devices (01/07/05) [ Amplifiers/Converters ]
• 90W, single stage, notebook adaptor (23/06/05) [ Power/Alternative Energy ]

• Low-side self-protected MOSFET (23/06/05) [ Power/Alternative Energy ]
• Thermal stability of MOSFETs (23/06/05) [ Power/Alternative Energy ]
• Thermal stability of MOSFETs (23/06/05) [ null ]
• Low-side self-protected MOSFET (23/06/05) [ null ]
• Design considerations for ESD/EMI filters: I (23/06/05) [ Amplifiers/Converters ]

• Using the NUD4001 to drive high current LEDs (23/06/05) [ Power/Alternative Energy ]
• UD4001 LED driver demonstration boards (23/06/05) [ Power/Alternative Energy ]
• ThermalTrak_audio output transistors (23/06/05) [ Power/Alternative Energy ]
• Simple input adapter reverse voltage protection (23/06/05) [ Power/Alternative Energy ]
• 90W, single stage, notebook adaptor (23/06/05) [ null ]

• NIS5102 SMART HotPlug_demonstration board (23/06/05) [ Power/Alternative Energy ]
• Designing the NCP1239 in high power ac-dc adapters (23/06/05) [ Power/Alternative Energy ]
• NIS6111 bias circuits (22/06/05) [ T&M ]
• 300W, wide mains, PFC stage driven by the NCP1653 (22/06/05) [ Processors/DSPs ]
• Compandor Cookbook (22/06/05) [ Amplifiers/Converters ]

• NIS5101 parallel device demo board (22/06/05) [ Interface ]
• Termination and interface of On Semiconductor ECL devices with CML output structure (22/06/05) [ Interface ]
• Non-isolated positive output buck/boost ac-dc converter (22/06/05) [ Amplifiers/Converters ]
• Using critical conduction mode for high power factor correction (22/06/05) [ Power/Alternative Energy ]
• Four key steps to design a continuous conduction mode PFC stage using the NCP1653 (22/06/05) [ Power/Alternative Energy ]

• Synchronizing NCP1207 (NCP1377/B, NCP1378) (22/06/05) [ Power/Alternative Energy ]
• BERS_ IC (better efficiency rectifier system) reverse recovery operation (22/06/05) [ Power/Alternative Energy ]
• Board mounting notes for SO8-flat lead (22/06/05) [ Manufacturing/Packaging ]
• NIS6111 bias circuits (22/06/05) [ null ]
• 300W, wide mains, PFC stage driven by the NCP1653 (22/06/05) [ null ]

• 100W universal input PFC boost using NCP1601A (22/06/05) [ Power/Alternative Energy ]
• Board mounting notes for NIS6111 leadless package (QFN) (22/06/05) [ Manufacturing/Packaging ]
• NIS6111 BERS_ IC (better efficiency rectifier system) switching application note (22/06/05) [ Power/Alternative Energy ]
• Non-isolated negative output buck ac/dc converter (22/06/05) [ Amplifiers/Converters ]
• Offline LED driver (21/06/05) [ Optoelectronics/Displays ]

• Thermal analysis and reliability of wire bonded ECL (21/06/05) [ Manufacturing/Packaging ]
• Determining the free-running frequency for QR systems (21/06/05) [ Power/Alternative Energy ]
• A simple low-cost non-isolated universal input off-line converter (21/06/05) [ Power/Alternative Energy ]
• A 70W low standby power supply with the NCP120x series (21/06/05) [ Power/Alternative Energy ]
• A quasi-resonant SPICE model eases feedback Loop designs (21/06/05) [ Power/Alternative Energy ]

• A 30W power supply operating in quasi-square wave resonant mode (21/06/05) [ Power/Alternative Energy ]
• A 75W TV power supply operating in quasi-square wave resonant mode using the NCP1207 controller (21/06/05) [ Power/Alternative Energy ]
• Board mounting notes for quad flat-pack no-lead package (QFN) (21/06/05) [ Manufacturing/Packaging ]
• Design of a 100W dc-dc converter for telecom systems using the NCP1560 (21/06/05) [ Amplifiers/Converters ]
• Implementing NCP1207 in QR 24W ac-dc converter with synchronous rectifier (21/06/05) [ Amplifiers/Converters ]

• AC characteristics of ECL devices (21/06/05) [ T&M ]
• Evaluating the power capability of NCP101X members (21/06/05) [ Power/Alternative Energy ]
• Designing converters with the NCP101X family (21/06/05) [ Amplifiers/Converters ]
• Odd number divide by counters with 50% outputs, synchronous clocks (20/06/05) [ T&M ]
• Implementing constant current constant voltage ac adapter by NCP1200 and NCP4300A (20/06/05) [ Power/Alternative Energy ]

• Options for lowering the capacitance in TSPD devices (20/06/05) [ Amplifiers/Converters ]
• Conducted EMI filter design for the NCP1200 (20/06/05) [ Amplifiers/Converters ]
• Interfacing Between LVDS and ECL (20/06/05) [ Power/Alternative Energy ]
• CLinPS, ECLinPS Lite, ECLinPS Plus, ECLinPS MAX and GigaComm marking and ordering information guide (20/06/05) [ Power/Alternative Energy ]
• Odd number divide by counters with 50% outputs and synchronous clocks (20/06/05) [ null ]

• The ECL translator guide (20/06/05) [ Power/Alternative Energy ]
• Designing with PECL (ECL at +5.0V (20/06/05) [ null ]
• Termination of ECL logic devices with EF (emitter follower) OUTPUT structure (20/06/05) [ Power/Alternative Energy ]
• Implementing the NCP1200 in low-cost ac/dc converters (20/06/05) [ Power/Alternative Energy ]
• Ramp compensation for the NCP1200 (20/06/05) [ Power/Alternative Energy ]

• Implementing the NCP1200 in a 10W ac-dc wall adapter (20/06/05) [ Power/Alternative Energy ]
• Implementing constant current constant voltage ac adapter by NCP1200 and NCP4300A (20/06/05) [ null ]
• Tips and tricks to build efficient circuits with NCP1200 (20/06/05) [ Power/Alternative Energy ]
• Metastability and the ECLinPS family (20/06/05) [ T&M ]
• Interfacing with ECLinPS (20/06/05) [ Interface ]

• TSPD (Thyristor surge protective devices) (20/06/05) [ Power/Alternative Energy ]
• ECL clock distribution techniques (20/06/05) [ Manufacturing/Packaging ]
• PICSTART-16B1 User's guide (17/06/05) [ Processors/DSPs ]
• Implementing auto baud on dsPIC30F devices (17/06/05) [ Amplifiers/Converters ]
• PIC16F639 microcontroller overview (17/06/05) [ Processors/DSPs ]

• A simple circuit for driving microcontroller friendly PWM generators (17/06/05) [ Processors/DSPs ]
• An introduction to AC induction motor control using the dsPIC30F MCU (17/06/05) [ Processors/DSPs ]
• Using the MSSP module to interface I (17/06/05) [ Memory/Storage ]
• Using the C18 compiler and the MSSP to interface I (17/06/05) [ Memory/Storage ]
• Programming baseline flash devices with PICkit 1 (17/06/05) [ Memory/Storage ]

• Interfacing the MCP9800 I (17/06/05) [ null ]
• Using the MSSP module to interface microwire serial EEPROMs to PIC16 devices (17/06/05) [ Memory/Storage ]
• Using the MSSP module to interface I (17/06/05) [ Memory/Storage ]
• Interface I (17/06/05) [ Memory/Storage ]
• Interface I (17/06/05) [ Memory/Storage ]

• Interfacing a MCP9700 analog output temperature sensor to a PICmicro microcontroller (17/06/05) [ Processors/DSPs ]
• Designing a boost-switching regulator with the MCP1650 (17/06/05) [ Amplifiers/Converters ]
• Data encryption routines for the PIC18 (16/06/05) [ Embedded ]
• Data encryption routines for the PIC18 (16/06/05) [ null ]
• Imaging solutions for emerging applications (16/06/05) [ Optoelectronics/Displays ]

• Transition-mode PFC controller enhances performance (16/06/05) [ Amplifiers/Converters ]
• Meet emerging power-supply efficiency requirements (16/06/05) [ null ]
• Home networking with Zigbee (16/06/05) [ Networks ]
• Trends, challenges in systems design (16/06/05) [ EDA/IP ]
• Understand essentials in high-speed PCB designs (16/06/05) [ Manufacturing/Packaging ]

• Interfacing SPI serial EEPROMs to Microchip PICmicro microcontrollers (16/06/05) [ Processors/DSPs ]
• Bidirectional VF control of single and 3-Phase induction motors using the PIC16F72 (16/06/05) [ Processors/DSPs ]
• Using the PIC18F2431 for sensorless BLDC motor control (16/06/05) [ Processors/DSPs ]
• Interfacing I (16/06/05) [ Processors/DSPs ]
• Migrating applications to USB from RS-232 UART with minimal impact on PC software (16/06/05) [ Interface ]

• Simple synchronous buck converter design - MCP1612 (16/06/05) [ Amplifiers/Converters ]
• Low-power digitized receiver for 2.4GHz GFSK apps (16/06/05) [ Amplifiers/Converters ]
• Piecewise linear interpolation on PIC12/14/16 series microcontrollers (16/06/05) [ Processors/DSPs ]
• Using the EUSART on the PIC16F688 (16/06/05) [ Processors/DSPs ]
• VF control of 3-phase induction motor using space vector modulation (16/06/05) [ Processors/DSPs ]

• Software PID control of an inverted pendulum using the PIC16F684 (16/06/05) [ Processors/DSPs ]
• USB port-powered Li-ion/Li-polymer battery charging (16/06/05) [ Interface ]
• Four-channel digital voltmeter with display and keyboard (16/06/05) [ Optoelectronics/Displays ]
• Designing energy meters with the PIC16F873A (16/06/05) [ null ]
• SystemVerilog enhances assertion-based verification (16/06/05) [ EDA/IP ]

• Learn how FPGA pares costs in digital displays (16/06/05) [ Amplifiers/Converters ]
• S320VC5510/5510A hardware designer's resource guide (15/06/05) [ Amplifiers/Converters ]
• S320TCI100 digital signal processor silicon errata (15/06/05) [ Amplifiers/Converters ]
• S320TCI100Q fixed-point digital signal processor (15/06/05) [ Amplifiers/Converters ]
• S320x281x to S320x280x migration overview (15/06/05) [ Amplifiers/Converters ]

• F2810, F2811, and F2812 ADC calibration (15/06/05) [ Amplifiers/Converters ]
• TMS320TCI100Q digital signal processor silicon errata (15/06/05) [ Amplifiers/Converters ]
• S320C6418 power consumption summary (15/06/05) [ Amplifiers/Converters ]
• OMAP591x: Tuning the system memory requirements of DSP/BIOS link (15/06/05) [ Amplifiers/Converters ]
• A novel approach for increasing voice channel density exploiting VLIW DSP (15/06/05) [ Amplifiers/Converters ]

• S320TCI100 fixed-point digital signal processor (15/06/05) [ Amplifiers/Converters ]
• Decoding convolutional and turbo codes in 3G wireless (15/06/05) [ RF/Microwave ]
• Programming C2000 flash DSPs using the SoftBaugh SUP2000 and GUP2000 in SCI mode (15/06/05) [ Amplifiers/Converters ]
• DSP control of electro-hydraulic servo actuators (15/06/05) [ Amplifiers/Converters ]
• Radiation hardness evaluation of a class V 32-bit floating-point digital signal processor (15/06/05) [ Amplifiers/Converters ]

• Migrating from the TI TL770x to the TI TLC770x (15/06/05) [ Processors/DSPs ]
• Synthesis and characterization of nickel manganite from different carboxylate precursors for thermistor sensors (14/06/05) [ T&M ]
• Stability analysis of low-dropout linear regulators with a PMOS pass element (14/06/05) [ Amplifiers/Converters ]
• Advantages of using PMOS-type low-dropout linear regulators in battery applications (14/06/05) [ Amplifiers/Converters ]
• Frequency response errors in voltage feedback op amps (14/06/05) [ Amplifiers/Converters ]

• Synchronous buck regulator design using the TI TPS5211 high-frequency hysteretic controller (14/06/05) [ Amplifiers/Converters ]
• Understanding the stable range of equivalent series resistance of an LDO regulator (14/06/05) [ Amplifiers/Converters ]
• Powering Celeron-type microprocessors using TI's TPS5210 and TPS5211 controllers (14/06/05) [ Processors/DSPs ]
• Optimal output filter design for microprocessor or DSP power supply (14/06/05) [ Amplifiers/Converters ]
• An audio circuit collection (14/06/05) [ RF/Microwave ]

• Simple design of an ultra-low-ripple dc/dc boost converter with TPS60100 charge pump (14/06/05) [ Amplifiers/Converters ]
• Extended output voltage adjustment (0V to 3.5V) using the TI TPS5210 (14/06/05) [ Amplifiers/Converters ]
• Comparison of different power supplies for portable DSP solutions working from a single-cell battery (14/06/05) [ Amplifiers/Converters ]
• Power supply solutions for TI DSPs using synchronous buck converters (14/06/05) [ Amplifiers/Converters ]
• TI TPS5602 for powering TI's DSP (14/06/05) [ Amplifiers/Converters ]

• Understanding the load-transient response of LDOs (14/06/05) [ Amplifiers/Converters ]
• Notebook computer upgrade path for APA (13/06/05) [ Power/Alternative Energy ]
• Fully differential amplifiers applications: Line termination, driving high-speed ADCs, and differential transmission lines (13/06/05) [ Amplifiers/Converters ]
• Understanding piezoelectric transformers in CCFL backlight applications (13/06/05) [ Amplifiers/Converters ]
• -48V/+48V hot-swap applications (13/06/05) [ Power/Alternative Energy ]

• Power supply solution for DDR bus termination (13/06/05) [ Power/Alternative Energy ]
• Why use a wall adapter for ac input power? (13/06/05) [ Power/Alternative Energy ]
• Pressure transducer-to-ADC application (13/06/05) [ Amplifiers/Converters ]
• 1.6V to 3.6V BTL speaker driver reference design (13/06/05) [ Power/Alternative Energy ]
• Runtime power control for DSPs using the TPS62000 buck converter (13/06/05) [ Amplifiers/Converters ]

• Power control design key to realizing InfiniBandSM benefits (13/06/05) [ Interface ]
• Using high-speed op amps for high-performance RF design, part 1 (13/06/05) [ RF/Microwave ]
• SWIFTTM designer power supply design program (13/06/05) [ Power/Alternative Energy ]
• Optimizing the switching frequency of ADSL power supplies (13/06/05) [ Power/Alternative Energy ]
• SHDSL AFE1230 application (13/06/05) [ Amplifiers/Converters ]

• Comparing magnetic and piezoelectric transformer approaches in CCFL applications (13/06/05) [ Amplifiers/Converters ]
• Notebook computer upgrade path for audio power amplifiers (13/06/05) [ null ]
• Optimal design for an interleaved synchronous buck converter under highslew- rate, load-current transient conditions (13/06/05) [ Amplifiers/Converters ]
• Interfacing DAC8831EVM to TMS320C6x processors (10/06/05) [ Power/Alternative Energy ]
• Interfacing the DAC8831EVM to TMS320C5x processors (10/06/05) [ Power/Alternative Energy ]

• Power-up high-performance FPGAs (10/06/05) [ Power/Alternative Energy ]
• LED-driver considerations (10/06/05) [ Optoelectronics/Displays ]
• Tips for successful power-up of today's high-performance FPGAs (10/06/05) [ null ]
• Soft-start circuits for LDO linear regulators (10/06/05) [ Power/Alternative Energy ]
• UCC28517 100-W PFC power converter with 12V, 8W bias supply, Part 1 (10/06/05) [ Power/Alternative Energy ]

• Auto-TrackTM voltage sequencing simplifies simultaneous power-up and power-down (10/06/05) [ Power/Alternative Energy ]
• Interfacing the DAC8831EVM to TMS320C5x processors (10/06/05) [ null ]
• Getting started with the data converter plug-in (10/06/05) [ null ]
• Load-sharing techniques: Paralleling power modules with overcurrent protection (10/06/05) [ Power/Alternative Energy ]
• Using the TPS61042 white-light LED driver as a boost converter (10/06/05) [ Power/Alternative Energy ]

• Using the UCC3580-1 controller for highlyefficient 3.3V/100W isolated supply design (10/06/05) [ Power/Alternative Energy ]
• Power conservation options with dynamic voltage scaling in portable DSP designs (10/06/05) [ Power/Alternative Energy ]
• Using the ADS8380 with the TMS320C6713 DSP (10/06/05) [ Amplifiers/Converters ]
• Recommended power solutions for TMS320x2810/1/2 DSPs (10/06/05) [ Amplifiers/Converters ]
• Interfacing the DAC8831EVM to TMS320C6x processors (10/06/05) [ null ]

• UCC28517 100-W PFC power converter with 12V, 8W bias supply, part 2 (10/06/05) [ Power/Alternative Energy ]
• Interfacing TI's touch screen controllers through McBSP (10/06/05) [ Processors/DSPs ]
• ISP1581/2/3 frequently asked questions (09/06/05) [ Embedded ]
• ISP176x linux programming guide (09/06/05) [ Embedded ]
• Interfacing the ISP1582 to the Intel PXA250 processor (09/06/05) [ Processors/DSPs ]

• ISP1582/83 firmware programming guide (09/06/05) [ Embedded ]
• ISP1581/2/3 frequently asked questions (09/06/05) [ null ]
• Power management for the LPC900 family (09/06/05) [ Power/Alternative Energy ]
• Handheld devices using the ISP1582/3 (09/06/05) [ RF/Microwave ]
• SC16CXXXB baud rate deviation tolerance (09/06/05) [ RF/Microwave ]

• Application of UART in GPS navigation system (09/06/05) [ RF/Microwave ]
• Application of Philips P89LPC932 microcontroller on RF card reader ignition control (09/06/05) [ RF/Microwave ]
• Low VCEsat (BISS) transistors and low VF (MEGA) Schottky rectifiers for dc/dc converters (09/06/05) [ Power/Alternative Energy ]
• Power management for the LPC900 family (09/06/05) [ Power/Alternative Energy ]
• Embedded systems design with the ISP176x (09/06/05) [ Embedded ]

• ISP1582/83 clearing an IN buffer (09/06/05) [ Embedded ]
• Entering ISP mode from user code (09/06/05) [ Embedded ]
• Adding ISP firmware to an LPC900 software project (09/06/05) [ Embedded ]
• LED dimmer demoboard (09/06/05) [ Optoelectronics/Displays ]
• ART serial interface through USB evaluation board (09/06/05) [ Interface ]

• UART serial interface through USB evaluation board (09/06/05) [ Interface ]
• Mounting and soldering recommendations for CATV modules (09/06/05) [ Manufacturing/Packaging ]
• PIP212-12M design guide (09/06/05) [ Power/Alternative Energy ]
• MicroPak soldering information (09/06/05) [ Manufacturing/Packaging ]
• Monitor heat dissipation in electronic systems by measuring active component die temperature (08/06/05) [ T&M ]

• Individual LED intensity control with MAX6958/MAX6959 LED drivers (08/06/05) [ Optoelectronics/Displays ]
• Connecting the DS2125 SCSI terminator in wide-bus applications (08/06/05) [ Interface ]
• System-management IC meets monitoring and sequencing requirements in multivoltage systems (08/06/05) [ Power/Alternative Energy ]
• Compact-footprint, 60A, two-phase power supply for AMD K8 motherboards (08/06/05) [ Power/Alternative Energy ]
• Rechargeable batteries: Basics, pitfalls, and safe recharging practices (08/06/05) [ Power/Alternative Energy ]

• Estimating supercapacitor backup time on trickle-charger real-time clocks (08/06/05) [ Power/Alternative Energy ]
• The basics of anti-aliasing: Using switched-capacitor filters (08/06/05) [ RF/Microwave ]
• Assembling high-lead (Pb) DS2502 flip-chips in a Pb-free assembly flow (08/06/05) [ Manufacturing/Packaging ]
• Signal filtering with the MAXQ7654 (08/06/05) [ Amplifiers/Converters ]
• Clock generation with spread spectrum (08/06/05) [ T&M ]

• CCFL characteristics (08/06/05) [ Optoelectronics/Displays ]
• Optimizing the MAX3656 output network for long laser leads in GPON/GEPON ONT application (08/06/05) [ Networks ]
• App Note 3512: Spread-spectrum clock oscillators lower EMI (08/06/05) [ Amplifiers/Converters ]
• PIC'ing the MAX5581: Interfacing a PIC microcontroller with the MAX5581 fast-settling DAC (08/06/05) [ Processors/DSPs ]
• Resistor calculator for the DS3906 (08/06/05) [ Interface ]

• Efficient bit-banged SPI port for 8051-compatible microcontrollers (08/06/05) [ Processors/DSPs ]
• Schematic and layout guidelines for high-speed data converters (08/06/05) [ Amplifiers/Converters ]
• Positive analogue feedback compensates PT100 transducer (07/06/05) [ Processors/DSPs ]
• High-speed random-data generator facilitates eye diagrams (07/06/05) [ Power/Alternative Energy ]
• Series protection for power-line transients (07/06/05) [ Power/Alternative Energy ]

• IR-Linked temperature sensor (07/06/05) [ T&M ]
• Precision current source is software-programmable (07/06/05) [ null ]
• Positive analog feedback compensates PT100 transducer (07/06/05) [ null ]
• Building a low-cost white-noise generator (07/06/05) [ null ]
• Series protection for power-line transients (07/06/05) [ null ]

• Audio filtering with the MAXQ2000 (07/06/05) [ RF/Microwave ]
• Parametric measurement unit (PMU) layout guidelines (07/06/05) [ RF/Microwave ]
• DS80C400/410/411 flash memory selection (07/06/05) [ Memory/Storage ]
• Using the Free SDCC C compiler to develop firmware for the DS89C420/430/440/450 family of microcontrollers (07/06/05) [ Processors/DSPs ]
• Instant performance enhancement with flash 5Cs (07/06/05) [ Interface ]

• Installing the DS9123O USB adapter on Windows 98 (07/06/05) [ Interface ]
• High-speed random-data generator facilitates eye diagrams (07/06/05) [ null ]
• EEPROM programming instructions for DS33Z11/DS33Z44 (07/06/05) [ Embedded ]
• Extending MAX6954 and MAX6955 Keyscan Beyond 32 Keys (07/06/05) [ Optoelectronics/Displays ]
• Extending the MAX6959 LED display-driver keyscan from 8-keys to 12-keys (07/06/05) [ Optoelectronics/Displays ]

• The serial-to-JTAG board for MAXQ processors (07/06/05) [ Processors/DSPs ]
• DS26502 hardware mode (06/06/05) [ EDA/IP ]
• Understanding the effects of clock tolerances on 50/60Hz noise rejection in high-performance Sigma Delta ADCs (06/06/05) [ Amplifiers/Converters ]
• Driving strain-gauge bridge sensors with signal-conditioning ICs (06/06/05) [ Amplifiers/Converters ]
• DS26502 hardware mode (06/06/05) [ null ]

• App Note 3398: DS80C400/DS80C410/DS80C411 network boot (06/06/05) [ Networks ]
• Requirements of remote keyless entry (RKE) systems (06/06/05) [ RF/Microwave ]
• Complete stand-alone GPS receiver solution with MAX2742 (06/06/05) [ RF/Microwave ]
• RF power reduction for CDMA/W-CDMA cellular phones (06/06/05) [ RF/Microwave ]
• Frequently asked questions about single-piece NV SRAM modules (06/06/05) [ Memory/Storage ]

• Initializing high-speed TINI systems (06/06/05) [ Memory/Storage ]
• DS33Z11-Ethernet LAN to unframed T1/E1 WAN bridge (06/06/05) [ Networks ]
• Guidelines for laying out T3 and E3 network interfaces (06/06/05) [ Interface ]
• WLAN 802.11b + mass storage USB stick for PCs, POS, handsets and PDAs reference design (06/06/05) [ Interface ]
• Manchester data encoding for radio communications (06/06/05) [ RF/Microwave ]

• Resistive bridge basics-Part one (06/06/05) [ Power/Alternative Energy ]
• Frequency calculator for the DS1094L (06/06/05) [ Manufacturing/Packaging ]
• TINIS400 external serial port reference design (06/06/05) [ Interface ]
• Using the MAX6650 and MAX6651 fan speed regulators with 24V and 48V fans (06/06/05) [ Amplifiers/Converters ]
• Injection transformers for closed-loop dc/dc converter network analysis (06/06/05) [ Amplifiers/Converters ]

• A compendium of application circuits for Intersil's digitally-controlled (XDCP) potentiometers (03/06/05) [ T&M ]
• ISL6424 dual LNB controller with I2C interface for advanced STB designs (03/06/05) [ RF/Microwave ]
• ISL6421, ISL6425 single LNB controllers with I2C interface for advanced satellite STB designs (03/06/05) [ RF/Microwave ]
• Smart battery primer (03/06/05) [ Power/Alternative Energy ]
• Shaft encoder drives multiple Intersil digitally controlled potentiontiometers (XDCPs) (03/06/05) [ Amplifiers/Converters ]

• Remotely adjustable voltage regulators using XDCPs (03/06/05) [ Amplifiers/Converters ]
• Using the ISL6420 PWM controller evaluation board (03/06/05) [ Amplifiers/Converters ]
• Implementing XSD host using a GPIO (03/06/05) [ EDA/IP ]
• Automotive BLDC Motor Control for PSoC (03/06/05) [ null ]
• Ultrasonic vehicle parking assistant with LIN 2.0 interface (03/06/05) [ Interface ]

• ISL6421A single LNB controller with I2C interface for advanced satellite STB designs (03/06/05) [ Interface ]
• How P-Channel MOSFETs can simplify your circuit (02/06/05) [ Power/Alternative Energy ]
• Class D amplifier's performance relationship to MOSFET parameters (02/06/05) [ Power/Alternative Energy ]
• Materials and practices application note (02/06/05) [ Power/Alternative Energy ]
• Assertive debugging: Correct software like you mean it (02/06/05) [ EDA/IP ]

• Materials and practices application note (02/06/05) [ null ]
• Class D audio amplifier basics (02/06/05) [ null ]
• Inspection application note (02/06/05) [ null ]
• Class D amplifier's performance relationship to MOSFET parameters (02/06/05) [ null ]
• Board mounting application note (02/06/05) [ null ]

• Paralleling HEXFET power MOSFETs (02/06/05) [ null ]
• How P-Channel MOSFETs can simplify your circuit (02/06/05) [ null ]
• Little known characteristics of phase noise (01/06/05) [ Embedded ]
• Using the Noise Reduction Feature on the AD7877 (01/06/05) [ Processors/DSPs ]
• Extracting clock signals from high-speed communications (01/06/05) [ Amplifiers/Converters ]

• Interfacing Micron MT9V022 image sensors to Blackfin processors (01/06/05) [ Optoelectronics/Displays ]
• Avoiding ultralow-power design pitfalls (01/06/05) [ Power/Alternative Energy ]
• Design and verification with Cadence's Virtuoso AMS Designer (01/06/05) [ EDA/IP ]
• Sigma-delta techniques extend DAC resolution (01/06/05) [ Amplifiers/Converters ]
• Isolated channels improve power measurements (01/06/05) [ T&M ]

• Telematics control provides car diagnostic access port (01/06/05) [ RF/Microwave ]
• Implementing modular instrumentation (01/06/05) [ T&M ]
• Separate vs. integrated smart-phone components (01/06/05) [ Amplifiers/Converters ]
• Set-Up and hold measurements in high-speed CMOS Input DACs (01/06/05) [ Amplifiers/Converters ]
• Sampled systems and the effects of clock phase noise and jitter (01/06/05) [ Amplifiers/Converters ]

• ADSP-BF533 EZ-KIT Lite and ADF70xx interface (01/06/05) [ Interface ]
• ADF7020 RF port impedance values for matching purposes (01/06/05) [ Interface ]
• Expanding the number of DAC outputs on the ADuC8xx and ADuC702x families (01/06/05) [ Amplifiers/Converters ]
• Timing synchronization for multiple AD9786TxDACs (01/06/05) [ Processors/DSPs ]
• Parallel implementation of fixed-point FFTs on TigerSHARC processors (01/06/05) [ Processors/DSPs ]

• Using the Noise Reduction Feature on the AD7877 (01/06/05) [ null ]
• ADSP-BF537 Blackfin highlights for ADSP-BF533 users (01/06/05) [ Processors/DSPs ]
• Using ADSP-BF561 Blackfin processor flag pins to emulate the PCM interface (01/06/05) [ Processors/DSPs ]
• A boot compression/decompression algorithm for Blackfin processors (01/06/05) [ Processors/DSPs ]
• Understanding jitter requirements of PLL-based processors (01/06/05) [ Processors/DSPs ]

• Using the ADSP-BF561 Blackfin processor as a TFT-LCD controller eliminates need for timing ASIC (01/06/05) [ Processors/DSPs ]
• A First Approach to IBIS Models: What they are and how they are generated (01/06/05) [ Processors/DSPs ]
• Universal precision Op Amp evaluation board (01/06/05) [ null ]
• Little known characteristics of phase noise (01/06/05) [ null ]
• A beginner's guide to Ethernet 802.3 (01/06/05) [ Interface ]

• Evaluation kit for the AD5253 64-position I (01/06/05) [ Memory/Storage ]
• Leakage power at 90nm and below (01/06/05) [ EDA/IP ]
• Delivering QoS in home IP networks (01/06/05) [ Networks ]
• Interconnects: Evolution at high-speed (01/06/05) [ Networks ]
• Application engine synthesis offers new design approach (01/06/05) [ EDA/IP ]

• Design for manufacturing is everyone's business (19/05/05) [ EDA/IP ]
• Bridging the system to RTL continuum (19/05/05) [ EDA/IP ]
• MATLAB: The sleeper ESL hit (18/05/05) [ EDA/IP ]
• MATLAB: The sleeper ESL hit (18/05/05) [ EDA/IP ]
• New layout requirements for memory, mixed-signal design (18/05/05) [ EDA/IP ]

• The high-stakes world of quality IP (17/05/05) [ EDA/IP ]
• RFID tracks future everyday apps (16/05/05) [ RF/Microwave ]
• System-in-a-cube to improve quality of life (16/05/05) [ RF/Microwave ]
• Utilizing the RF spectrum for WiMAX (16/05/05) [ RF/Microwave ]
• Across the flow: DFM's many faces (16/05/05) [ EDA/IP ]

• LVDS pre-emphasis boosts cable performance (16/05/05) [ Interface ]
• TFT-LCD modules improve video quality (16/05/05) [ Optoelectronics/Displays ]
• Signals predict Serdes jitter behavior (16/05/05) [ T&M ]
• IC Design House Survey 2005: South Korea (10/05/05) [ EDA/IP ]
• IC Design House Survey 2005: Taiwan (10/05/05) [ EDA/IP ]

• IC Design House Survey 2005: mainland China (10/05/05) [ EDA/IP ]
• How to analyse processor features for network use (02/05/05) [ Networks ]
• PolyPhase for step-up conversion (02/05/05) [ Power/Alternative Energy ]
• Easing RF measurements in cellphones (02/05/05) [ RF/Microwave ]
• WLAN baseband Tx module testing with DAQ cards (02/05/05) [ Manufacturing/Packaging ]

• Mobile displays get brighter (02/05/05) [ Optoelectronics/Displays ]
• Picture-perfect resolution for high-definition TVs (02/05/05) [ Optoelectronics/Displays ]
• USB solutions for the embedded world (02/05/05) [ Interface ]
• Intra-panel interface for large TFT-LCD apps (02/05/05) [ Interface ]
• Tackling physical verification below 90nm (02/05/05) [ EDA/IP ]

• Timing is right for real-time spectrum analysis (02/05/05) [ T&M ]
• Subtract software costs by adding CPUs (01/05/05) [ Manufacturing/Packaging ]
• Keeping up connections to MPLS nets (18/04/05) [ RF/Microwave ]
• Adjusting signal levels in analog systems (18/04/05) [ Amplifiers/Converters ]
• Efficiently extract heat from heat sinks (18/04/05) [ T&M ]

• Power-sensing circuit breaker protects laptops (18/04/05) [ Power/Alternative Energy ]
• Avoiding interference in the 2.4GHz ISM band (18/04/05) [ RF/Microwave ]
• Net processors for advanced security apps (18/04/05) [ Networks ]
• Power management silicon in PoE apps (18/04/05) [ Networks ]
• Universal Amplifiers (04/04/05) [ EDA/IP ]

• Breathe life into hardware and software co-design (03/04/05) [ Interface ]
• Tricks with PICs (02/04/05) [ Interface ]
• New standard in hot-swap reliability (01/04/05) [ Power/Alternative Energy ]
• Understanding cascaded integrator-comb filters (01/04/05) [ Amplifiers/Converters ]
• Tire pressure monitoring increases car safety (01/04/05) [ T&M ]

• Replacing halogen lighting with LEDs (01/04/05) [ Optoelectronics/Displays ]
• Enhance protection of Li-based batteries (01/04/05) [ Power/Alternative Energy ]
• New standard in hot-swap reliability (01/04/05) [ null ]
• Achieve DVB-S2 performance in receiver front-end design (01/04/05) [ RF/Microwave ]
• Generating good random numbers (01/04/05) [ Networks ]

• Stacked LED makes compact optocouplers (01/04/05) [ Embedded ]
• Modeling for HW-dependent SW systems (01/04/05) [ EDA/IP ]
• Virtual instrumentation for user-defined apps (16/03/05) [ Manufacturing/Packaging ]
• Denser, smaller, better 8bit devices emerge (16/03/05) [ Amplifiers/Converters ]
• Adding games, graphics on handsets (16/03/05) [ Processors/DSPs ]

• Protect car battery chargers from fault failures (16/03/05) [ Power/Alternative Energy ]
• Transaction-based simulation using SystemC/SCV (16/03/05) [ EDA/IP ]
• Serial ATA: Designing for high-speed storage (16/03/05) [ Networks ]
• Interoperability: Foundation for digital home (16/03/05) [ Networks ]
• Lower costs through design tool performance (16/03/05) [ EDA/IP ]

• Smart software defines CE's new frontier (16/03/05) [ null ]
• Acoustic micro imaging of internal interfaces in a stacked die package (16/03/05) [ EDA/IP ]
• Beyond pass/fail: Exploring device failures (16/03/05) [ T&M ]
• I/Os for distributed automation control (16/03/05) [ Amplifiers/Converters ]
• CMOS transceiver key component for next-gen cellphones (01/03/05) [ RF/Microwave ]

• PolySwitch technology offers resettable protection strategy (01/03/05) [ Processors/DSPs ]
• Charge pumps in battery-powered devices (01/03/05) [ Power/Alternative Energy ]
• Verification issues for reconfigurable IP (01/03/05) [ Amplifiers/Converters ]
• Split 802.11 MAC processing (01/03/05) [ RF/Microwave ]
• Code compression under the microscope (01/03/05) [ EDA/IP ]

• Physical synthesis in structured ASICs (01/03/05) [ EDA/IP ]
• Non-coherent approach to wireless receiver test (01/03/05) [ T&M ]
• Generating event-based system power simulation (01/03/05) [ T&M ]
• Audio requirements in digital telephony (01/03/05) [ Amplifiers/Converters ]
• Changing MCU technologies for motor control (01/03/05) [ Processors/DSPs ]

• Embedded Systems Development Trends: Asia (24/02/05) [ EDA/IP ]
• Single instrument speeds up wireless test (16/02/05) [ T&M ]
• The coexistence of the LXI and PXI standards (16/02/05) [ Networks ]
• Latency analysis of major chip-to-chip interconnects (16/02/05) [ EDA/IP ]
• Reduce costs in automotive power systems (16/02/05) [ EDA/IP ]

• FPGAs allow quick PCI Express implementation (16/02/05) [ Interface ]
• Smart antennas: A design alternative (16/02/05) [ RF/Microwave ]
• An introduction to model checking (16/02/05) [ T&M ]
• Enabling multimode handsets (16/02/05) [ Amplifiers/Converters ]
• Java takes on system-level programming (16/02/05) [ Memory/Storage ]

• Simulation-centric processes for aerospace (02/02/05) [ Manufacturing/Packaging ]
• Sorting data in two clock cycles (01/02/05) [ EDA/IP ]
• Improve DPAs with integrated modules (01/02/05) [ Power/Alternative Energy ]
• OLEDs illuminate the future of displays (01/02/05) [ Interface ]
• Abstraction layer eases I/O integration (01/02/05) [ EDA/IP ]

• EMI immunity testing for automotive components (01/02/05) [ T&M ]
• Verification of prototype-board schematics (01/02/05) [ T&M ]
• SiGe direct modulator for multiband upconversion (01/02/05) [ Amplifiers/Converters ]
• Software synthesis for embedded systems (20/01/05) [ EDA/IP ]
• Accelerating algorithms in hardware (17/01/05) [ Processors/DSPs ]

• Enhancing 3G handheld radios with smart antennas (17/01/05) [ Amplifiers/Converters ]
• Tackling push-to-talk challenges in handsets (17/01/05) [ RF/Microwave ]
• Learn the DTA equation (17/01/05) [ T&M ]
• Over the air efficiency with incremental redundancy (17/01/05) [ T&M ]
• MCU, flash enhance battery charger features (17/01/05) [ Power/Alternative Energy ]

• Understanding the value of signal integrity (17/01/05) [ Memory/Storage ]
• SoC-based MCU bus design in high bandwidth embedded apps (17/01/05) [ Processors/DSPs ]
• Power MOSFETs for smaller dc-dc converters (17/01/05) [ Amplifiers/Converters ]
• Next-gen DSL: SoC doubles the data rates (17/01/05) [ Networks ]
• Serial buses cut EMI, cabling constraints in 3G cam phones (17/01/05) [ Interface ]

• USB-based data acquisition devices come of age (17/01/05) [ Amplifiers/Converters ]
• High Performance Amplifiers (10/01/05) [ null ]
• Managing tasks on x86 processors (04/01/05) [ Processors/DSPs ]
• Generate stepper-motor speed profiles in real time (03/01/05) [ EDA/IP ]
• Integration drives embedded HW, SW development (03/01/05) [ EDA/IP ]

• Real-time video capture needs more mem power (03/01/05) [ Amplifiers/Converters ]
• Analog switches beat bus switches in ultraportable devices (03/01/05) [ Amplifiers/Converters ]
• Signal conditioning for RF modulators (03/01/05) [ Amplifiers/Converters ]
• Jetting of flux for flip chips (03/01/05) [ Manufacturing/Packaging ]
• Reduce test times in next-gen cellular systems (03/01/05) [ T&M ]

• Switch-mode PAs shine in WLAN designs (03/01/05) [ RF/Microwave ]
• Timing is everything for VoIP success (03/01/05) [ Networks ]
• Measuring quality of video-over-IP (03/01/05) [ Amplifiers/Converters ]
• Back to the language roots (02/01/05) [ EDA/IP ]
• Compiling software to gates (01/01/05) [ EDA/IP ]