( File format: PDF, 552 KB )
AM26LV32C, AM26LV32I (Rev. E)
Texas Instruments
Description
The AM26LV32, BiCMOS, quadruple, differential line receiver with 3-state outputs is designed to be similar to TIA/EIA-422-B and ITU Recommendation V.11 receivers with reduced common-mode voltage range due to reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit connection directly to a bus-organized system. Each device features receiver high input impedance and input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range from -0.3 V to 5.5 V. When the inputs are open circuited, the outputs are in the high logic state. This device is designed using the Texas Instruments (TI™) proprietary LinIMPACT-C60™ technology, facilitating ultra-low power consumption without sacrificing speed. This device offers optimum performance when used with the AM26LV31 quadruple line drivers. The AM26LV32C is characterized for operation from 0°C to 70°C. The AM26LV32I is characterized for operation from -45°C to 85°C.
Features
Switching Rates up to 32 MHz Operates from a Single 3.3-V Supply Ultra-Low Power Dissipation...27 mW Typ Open-Circuit, Short-Circuit, and Terminated Fail-Safe -0.3-V to 5.5-V Common-Mode Range With ±200 mV Sensitivity Accepts 5-V Logic Inputs With a 3.3-V VCC Input Hysteresis...50 mV Typ 235 mW With Four Receivers at 32 MHz Pin-to-Pin Compatible With AM26C32, AM26LS32, and MB570 LinIMPACT-C60 and TI are trademarks of Texas Instruments.
Related Datasheets
| Part Number | Description | Category |
| • ADS1110 | ADS1110: 16-Bit Analog-to-Digital Converter with Onboard Reference (Rev. A) | Cards and Modules |
| • AM26LV31 | AM26LV31C, AM26LV31I (Rev. G) | Power Supplies, Batteries and Accessories |
| • OPA137 | Low Cost FET-Input Operational Amplifiers | Actives - Sensors and Transducers |
| • SN75173 | Quadruple Differential Line Receivers (Rev. E) | Power Supplies, Batteries and Accessories |
| • TPA3100D2 | 20-W Stereo Class-D Audio Power Amplifer (Rev. E) | Actives - Sensors and Transducers |
| • TUSB6020 | USB 2.0 High-Speed On-the-Go Dual-Role Controller (Rev. E) | EDA - Embedded Systems Design |
| • XTR111 | Precision Voltage-to-Current Converter/Transmitter (Rev. A) | Actives - Sensors and Transducers |
| • XTR116 | XTR115, XTR116: 4-20mA Current Loop Transmitters (Rev. A) | Actives - Sensors and Transducers |
As the hyperlinked contents/websites are those of third parties, we cannot vouch for their accuracy or legitimacy.
Hot Articles
Most Popular Articles
Search EE Times India
Max's Cool Beans
Strange modes of transport and other "stuff"
Someone just pointed me at a YouTube video that claims to show the world's first e-powered multicopter flight...
