20-V digital or ± 10-V peak-to-peak switching 280- typical on-state resistance for 15-V operation Switch on-state resistance matched to within 10 typ. over 15-V signal-input range High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k High degree of linearity: <0.5% distortion typ. @ fis = 1 kHz, Vis = 5 Vp-p, VDD–VSS 10 V, RL = 10 k Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ. @ VDD–VSS = 18 V, TA = 25°C Extremely high control input impedance (control circuit isolated form signal circuit: 1012typ. Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k Matched control-input to signal-output capacitance: Reduces output signal transients Frequency response, switch on = 40MHz (typ.) 100% tested for quiescent current at 20 V Maximum control input current of 1 µA at 18 V over full package temperature range; 100 nA at 18 V and 25°C 5-V, 10-V, and 15-V parametric ratings Applications: Analog signal switching/multiplexing Signal gating Squelch control Chopper Modulator Demodulator Commutating switch Digital signal switching/multiplexing CMOS logic implementation Analog-to-digital & digital-to-analog conversion Digital control of frequency, impedance, phase, and analog-signal gain Data sheet acquired from Harris Semiconductor