Power Factor and PWM Controller
Linear Technology Inc.
Description
The LT®1509 is a complete solution for universal off-line switching power supplies utilizing active power factor correction. The PFC section is identical to the LT1248 PFC controller except the EN/SYNC pin is removed because PFC and PWM are synchronized internally. The current mode PWM section (the LT1508 is the volt-age-mode counterpart) contains all the primary side functions to convert the PFC preregulated high voltage output to an isolated low voltage output. The PWM duty cycle is internally limited to 47% (maximum 50%) to prevent transformer saturation. PWM soft start begins when PFC output reaches the preset voltage. In the event of brief line loss,the PWM will be shut off when the PFC output voltage drops below 73% of the preset value.
Features
PFC and PWM Single Chip Solution Synchronized Operation up to 300kHz 99% Power Factor over 20:1 Load Current Range Current Mode PWM Instantaneous Overvoltage Protection Dedicated Overvoltage Protection (OVP Pin) Minimal Line Current Dead Zone Typical 250µA Start-Up Supply Current Line Switching Noise Filter Low Quiescent Current: 13mA Fast 2A Peak Current Gate Drivers Separate Soft Start Controls
As the hyperlinked contents/websites are those of third parties, we cannot vouch for their accuracy or legitimacy.
Hot Articles
Most Popular Articles
Search EE Times India
Max's Cool Beans
Strange modes of transport and other "stuff"
Someone just pointed me at a YouTube video that claims to show the world's first e-powered multicopter flight...












