( File format: PDF, 794 KB )
MSP430FE42x Mixed-Signal Microcontroller (Rev. B)
Texas Instruments
Description
The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs. The MSP430xE42x series are microcontroller configurations with three independent 16-bit sigma-delta A/D converters and embedded signal processor core used to measure and calculate single-phase energy in both 2 and 3 wire configurations. Also included is a built-in 16-bit timer, 128 LCD segment drive capability, and 14 I/O pins. Typical applications include 2-wire and 3-wire single-phase energy metering including tamper-resistant meter implementations.
Features
Low Supply-Voltage Range, 2.7 V . . . 3.6 V Ultralow-Power Consumption: Active Mode: 400 µA at 1 MHz, 3.0 V Standby Mode: 1.6 µA Off Mode (RAM Retention): 0.1 µA Five Power-Saving Modes Wake-Up From Standby Mode in 6 µs Frequency-Locked Loop, FLL+ 16-Bit RISC Architecture, 125-ns Instruction Cycle Time Embedded Signal Processing for Single-Phase Energy Metering with Integrated Analog Front-End and Temperature Sensor (ESP430CE1) 16-Bit Timer_A With Three Capture/Compare Registers Integrated LCD Driver for 128 Segments Serial Communication Interface (USART), Asynchronous UART or Synchronous SPI selectable by software Brownout Detector Supply Voltage Supervisor/Monitor With Programmable Level Detection Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse Bootstrap Loader in Flash Devices Family Members Include: MSP430FE423: 8KB + 256B Flash Memory, 256B RAM MSP430FE425: 16KB + 256B Flash Memory, 512B RAM MSP430FE427: 32KB + 256B Flash Memory, 1KB RAM Available in 64-Pin Quad Flat Pack (QFP) For Complete Module Descriptions, Refer to the MSP430x4xx Family User’s Guide, Literature Number SLAU056
Related Datasheets
| Part Number | Description | Category |
| • MSP430F2013 | MSP430x20x1, MSP430x20x2, MSP430x20x3 Mixed Signal Microcontroller (Rev. D) | EDA - IC Design |
| • MSP430F423 | MSP430F42x Mixed Signal Controller (Rev. A) | EDA - IC Design |
| • MSP430FE423A | MSP430FE42xA Mixed Signal Microcontroller | EDA - IC Design |
| • MSP430FE425 | MSP430FE42x Mixed-Signal Microcontroller (Rev. B) | EDA - IC Design |
| • MSP430FE427 | MSP430FE42x Mixed-Signal Microcontroller (Rev. B) | EDA - IC Design |
| • MSP430FG4250 | MSP430FG42x0 Mixed Signal Microcontroller (Rev. A) | EDA - IC Design |
As the hyperlinked contents/websites are those of third parties, we cannot vouch for their accuracy or legitimacy.
Hot Articles
Most Popular Articles
Search EE Times India
Max's Cool Beans
Strange modes of transport and other "stuff"
Someone just pointed me at a YouTube video that claims to show the world's first e-powered multicopter flight...
