Dual Outputs, Each Supporting up to 300 mA Current Space saving feature when compared to two individual LDOs. Available in Output Combinations Ranging from 0.8 V to 5.0 V Multiple variations provide solutions for any designs. 2.1 V to 5.5 V VCC Operating Supply Range Low battery operation keeps system operational on weak batteries. Each Output has a Dedicated Enable Control Pin Low current comsumption when operating only one output. Enable Threshold Supports sub-1 V Systems Device supports latest interface technology. Very Low Drop Out Voltage (50 mV typ @ 100 mA load) Low dropout keeps system operational on weak batteries. Low Noise (~20 uVrms) without Bypass Capacitor Keeps system level interface issues to a minimum. Ultra Low Shutdown Current (0.2 uA) Low standby current keeps battery drain to a minimum. Low Quiescent and Ground Current (80 - 100 uA typ.) Low operational current keeps battery drain to a minimum. Thermal Shutdown and Current Limit Protection Robust part maintains high system level performance. Active Output Discharge when Disabled Fast turn-off times. No Minimum Output Current Required for Stability Operation at low currents keeps battery drain to a minimum. Requires Cout of only 1.0 uF (any ESR) for Stability Provides low system level cost. Stable with Any Type of Capacitor (including MLCC) and Zero Load Operation with a wide variety of external components allows low sytem level cost. Input Under Voltage Lock Out (UVLO) Provides a predictable turn-on. Internally Compensated Regulator for Quick Transient Response Maintains accurate regulation during transient events.