What are application notes?
| Application notes refer to instuctions and recommendations from the vendor provided in addition to the normal reference manuals. |
- Article
(3868) -
Forum
(0) -
Blog
(0)
total search3868 articles
sort by relevance
sort by date
| 2012-04-05 | Using voltage detector in M16C/5L In this application note, Renesas Electronics provides an application example for using the voltage detector in M16C/5L MCUs. |
| 2011-10-21 | Perform ROM verification using Checksum Here is a document that describes a method for diagnosing anomalies in the ROM. In this application note, the Flash Development Toolkit (hereinafter FDT) is used to calculate the SUM value. |
| 2011-10-17 | Understanding the Flash Loader project Here's an application note that provides a reference for the pieces of the Flash Loader project. |
| 2011-10-07 | Learn about autosync feature GSPS ADC Read this application note for an overview of synchronisation and implementation of the feature, as well as FAQs. |
| 2011-06-27 | Energy management for small portable systems Here's an application note that describes power management schemes for portable applications with four- and three-cell battery systems. |
| 2011-06-20 | LM8850 evaluation board application note LM8850 evaluation board application note |
| 2011-02-08 | Avoiding audible noise at light loads when using PFC converter This application note applies to Texas Instruments' average current mode, modulation PFC controllers. |
| 2011-01-21 | DC voltage controls PWM dimming of HB LEDs The LED driver circuit discussed in this application note includes a hysteretic controller, related power components, and a control circuit based on the quad op amp. |
| 2011-01-18 | Simple current limiter is programmable The circuit described in this application note lets you program a current limit without using microcontrollers or data converters. |
| 2010-12-13 | Features, target apps of AX220xx MCU This application note by Asix Electronics Corp. discusses the features and target applications of AX220xx, a single chip MCU with TCP/IP and 802.11 WLAN MAC/baseband. |
| 2010-09-16 | Mounting recommendations for STAC boltdown packages This application note provides a set of guidelines to be considered for the proper attachment of STAC packages. |
| 2010-09-15 | Interfacing an EEPROM via I2C using the MSP430 This application note describes the implementation of I2C communication between the MSP430F16x USART or the MSP430F2xx USCI I2C hardware module and an external EEPROM (24xx128). |
| 2010-09-15 | System-80 asynchronous display on the i.MX31 WINCE 6.0 PDK This application note provides the necessary information, considerations and procedure to add or adapt a System-80 Type 2 asynchronous panel to the WINCE600 BSP for the i.MX31 PDK. |
| 2010-09-16 | EVL250W-ATX80PL: 80 PLUS Silver 250W ATX SMPS demonstration board This application note describes the characteristics and performance of a 250W wide range input and power factor corrected power supply designed to be used in an ATX app. |
| 2010-09-15 | 2.5kW MMA welding machine In this application note, a power AC/DC converter, suitable to be used as the current supply for the MMA welding process, is described. |
| 2010-09-15 | bq27510-G1 to bq27510-G2 change list This application note describes the changes made from bq27510-G1 to bq27510-G2. |
| 2010-09-14 | Using sleep mode on the MPC5668x This application note explains how to use the low power mode, the process and options available for transitioning between run and sleep mode on the MPC5668x MCUs and provides example scenarios and software. |
| 2010-09-14 | Programming the MAX1441 with a USB-to-JTAG interface board This application note describes the connection between the MAXQUSBJTAG-KIT board and the MAX1441 application board. |
| 2010-09-13 | TUSB9260 implementation guide This application note is provided to assist platform designers in implementing the TUSB9260 USB 3.0 to serial ATA (SATA) bridge controller. |
| 2010-09-13 | Digital constant-current controller for LED applications based on STM8S208X This application note aims to describe a new technique, based on a digital approach, performing a real average current-control on an LED street lighting platform. |
| 2010-09-13 | 19V-65W quasi-resonant flyback adapter using L6566B, TSM1014 This application note describes the characteristics and features of a 65W demo board, tailored to the specifications of a typical hi-end portable computer power supply. |
| 2010-09-10 | 70W HID lamp ballast based on the L6569, L6385E and L6562A This application note describes the electronic lamp ballast for 70W high intensity discharge (HID) metal halide lamps (MHL) used for general indoor applications. |
| 2010-09-13 | How many bits are enough? This app note aims to educate customers on the details to understand more about their application, to help extract meaningful information from the data sheet and learn some of the techniques to get the most out of the sensor of the application. |
| 2010-09-09 | Output current sensing This application note presents the current sensing accuracy for 35mΩ channel and the practical implementation of a calibration procedure to improve it. |
| 2010-09-09 | Using the development trigger semaphore module as implemented on the MPC564xA This application note describes the operation of the development trigger semaphore (DTS) module and its primary intended use. |
| 2010-09-10 | Porting applications from Cosmic to CodeWarrior This application note describes how to port HC08 and HC12 applications written for Cosmic compiler to CodeWarrior. |
| 2010-09-03 | The quick guide to layout considerations for the Li-ion (Li+) battery simulator This application note describes basic layout guidelines for a Li+ battery charger simulator. |
| 2010-09-08 | TMS320DM6446 594MHz to 810MHz migration guide This application note is intended to provide an overview of changes necessary to upgrade a DM6446-based design from the 513MHz or 594MHz device to an 810MHz device. |
| 2010-09-07 | TMS320C6474 hardware design guide This application note is intended to aid in the hardware design and implementation of a C6474-based system. |
| 2010-09-03 | Using a 9bit software UART with Stellaris microcontrollers This application note describes the 9bit UART software add-on in detail. |
Most Popular Articles
Search EE Times India
Max's Cool Beans
Strange modes of transport and other "stuff"
Someone just pointed me at a YouTube video that claims to show the world's first e-powered multicopter flight...
