An LCD drive for the Z8 Encore! MCU
|
2004-05-04 |
| This app note discusses the programming of the multiplexed type of LCD in conjunction with the Z8 Encore! MCU device |
|
| SH7618 MCU: HIF boot mode
|
2007-04-13 |
| The SH7618 MCU in the HIF boot mode is used for designing user software. This application note explains the start up method for the same |
|
| An introduction to AC induction motor control using the dsPIC30F MCU
|
2005-06-17 |
| This app note demonstrates how to use the dsPIC30F MCU to control an AC induction motor (ACIM |
|
| A Webpage Interface for the eZ80F91 MCU using Java
|
2004-05-04 |
| This app note focuses on developing an application to remotely control the pins of the eZ80F91 MCU from a webpage |
|
| PFD function in HT47R20A-1 MCU
|
2009-06-03 |
| Know how to use Programmable Frequency Divider function in the HT47R20A-1 MCU device |
|
| Using wait control bit of R8C/M12A MCU
|
2011-11-03 |
| Learn about the transition to wait mode and return from wait mode using the wait control bit of the R8C/M12A Group. |
|
| Adding MCU into FPGA design
|
2010-11-30 |
| Know how to instantiate an MCU directly into the HDL and used it immediately in a standard FPGA design flow without special scripts or complicated steps |
|
| Using oscillator stop detection in MCU
|
2011-09-12 |
| Here's a method for turning on an error warning LED when the main clock stops and an oscillator stop detection interrupt is generated. |
|
| Set up a PLL loop filter on the eZ80F91 MCU
|
2004-05-04 |
| Set up a PLL loop filter on the eZ80F91 MCU |
|
| Fan speed controller based on digital temp sensor, MCU
|
2009-05-19 |
| Know the method of defining the system for regulating the speed of the 5Vdc fan using MCU and digital temperature sensor |
|
| EconOscillator for clocking 8051 MCU
|
2008-12-18 |
| Know how to meet external clock requirements using EconOscillator, and program 8051 internal serial port control register. |
|
| Features, target apps of AX220xx MCU
|
2010-12-13 |
| This application note by Asix Electronics Corp. discusses the features and target applications of AX220xx, a single chip MCU with TCP/IP and 802.11 WLAN MAC/baseband |
|
| MCU power control using power-off 2 mode
|
2011-12-28 |
| Learn the power-off 2 mode in Renesas Electronics' R8C/LA8A Group. |
|
| Comparison of M16C/62P and M16C/65C MCU
|
2011-11-04 |
| Learn about the differences between M16C/62P 100-pin version and M16C/65C 100-pin version. |
|
| Interface MCU with MMC/SD flash memory cards
|
2008-11-18 |
| Know how to implement SPI between MSP430F161x MCU and MMC/SD flash memory card in SPI mode |
|
| Modulo exponentiation on secure MCU
|
2009-05-27 |
| Know how modulo exponentiation is done on Maxim's DS5250 high-speed, secure microcontroller. |
|
| MCU interface to TPS60250 via I2C master software
|
2008-11-27 |
| Here's a simple hardware and software platform to demonstrate MCU implementing an I2C master interface using two general-purpose I/O pins |
|
| MCU-based SPI boot circuit
|
2008-10-27 |
| MCU-based Serial Port Interface boot circuit is a low cost solution for modifying some device parameters at power up |
|
| MCU power control using power-off 0 mode
|
2011-12-27 |
| Read about a setting method and an application example for power control using power-off 0 mode in the R8C/LA8A Group. |
|
| Sensor, MCU for contactless touch apps
|
2009-02-09 |
| Read about a touch pad demo board for the proximity capacitive sensor MPR084 and the USB MCU MC9S08JM60 |
|
| IC temperature sensor accuracy compensation with a PICmicro MCU
|
2008-08-05 |
| The non-linear accuracy characteristics of a temperature sensor can be compensated for higher-accuracy embedded systems. |
|
| Monitoring video synchronization signals on ST7FLCD1 MCU
|
2004-11-30 |
| Monitoring video synchronization signals on ST7FLCD1 MCU |
|
| Implementing bootloader using 78K0/Kx2 MCU
|
2008-09-29 |
| The advantage of a bootloader is the ability to update or replace your application code without an external programmer. |
|
| PMC trimming of regulators, low voltage detection on MCU
|
2011-08-30 |
| Here's a discussion on power management controller trimming of internal regulators and low voltage detection on the MPC5674F MCU |
|
| USB HID bootloader for MCU
|
2011-08-29 |
| The bootloader is a small program put into the JM60 that complies with the USB HID class, which receives commands and data from the host to program and erase the flash memory. |
|
| Use a module in MCU to write touch sensing software
|
2011-08-16 |
| Learn how to develop a touch sensing design using the touch sensing input module in MCUs. |
|
| MIPS32 M4K core shadow registers for MCU apps
|
2008-09-25 |
| The M4K core provides an elegant solution in the form of GPR shadow register support. |
|
| EKG-based heart-rate monitor implementation using MSP430G2452 MCU
|
2011-05-27 |
| Read about thelow-cost heart-rate monitor solution based on the MSP430 LaunchPad Value Line Development Kit. |
|
| SRAM interface in MIPS32 M4K core for MCU apps
|
2008-09-25 |
| This paper discusses the SRAM interface, a standard feature of the MIPS32 M4K core. |
|
| Using S12GN32 MCU for light control, protection
|
2011-09-06 |
| Understand the control and protection capabilities S12GN32. |
|
Strange modes of transport and other "stuff"
|
|
|IIC-China
|
|
|Electronic Components|Computer Products|Trade Show Center
|Site Feedback|Site Map|Help|About Us|Contact Us|Terms of Use|Privacy Policy|Security Commitment