Inspection application note
|
2005-06-02 |
| This app note demonstrates the DirectFET technology, which facilitates dual-sided cooling of surface mounted power MOSFET devices |
|
| Connecting a solid state relay for dc switching
|
2001-09-12 |
| This application note illustrates the design of a MOSFET-based relay that is capable of switching a DC load |
|
| The destructive effects of Kelvin leaded packages in high-speed, high-frequency operation
|
2001-09-06 |
| This application note explores in detail the impact of intermediate speed enhancement techniques in power MOSFET die technology, such as the Kelvin lead, without commensurate attention to other stray inductive terms |
|
| Insuring reliable performance from power MOSFETs
|
2000-12-11 |
| This application note is intended to help circuit designers in developing reliable power MOSFET circuits by examining six potential problem areas and by offering suggestions in eliminating problems in each area |
|
| UniFET—optimised switch for discontinuous current mode power factor correction
|
2009-11-03 |
| This application note discusses merits of planar technology power MOSFET in discontinuous current mode power factor correction application |
|
| Design guide for LinkSwitch-TN
|
2009-02-16 |
| LinkSwitch-TN combines a high voltage power MOSFET switch with an ON/OFF controller in one device |
|
| 36W ballast app with NCP5181
|
2009-04-23 |
| Learn how the NCP5181, a power MOSFET driver, can be implemented in a ballast application |
|
| Improved power MOSFETs boost efficiency in a 3.5kW single phase PFC
|
2006-10-16 |
| This application note shows how the choice of power components, the optimisation of MOSFET switching speeds and the mechanical layout of the output power loop affects the success of very high power PFC circuits |
|
| SOA advantages of MOSFETs
|
2010-06-24 |
| Protection issues must not be neglected regardless of amplifier choice, but the compromises required to protect the amplifier are eased with MOSFET designs |
|
| Using NCP5104 for a ballast app
|
2009-01-28 |
| Know how the NCP5104 power MOSFET driver can be implemented in a ballast application |
|
| BERS_ IC (better efficiency rectifier system) reverse recovery operation
|
2005-06-22 |
| This app note is discusses the NIS6111, a hybrid diode containing a power MOSFET, polarity comparator and internal bias circuit |
|
| Employ scope for hot-swap circuit analysis
|
2012-01-23 |
| Know how to connect the oscilloscope's probes to a hot-swap circuit to obtain accurate values for MOSFET power dissipation and load capacitance |
|
| High side switch for PCMCIA, USB apps
|
2009-04-30 |
| ST890 is a low voltage, P-channel MOSFET power switch, intended for high side load switching applications |
|
| Logic level VGS ratings for power MOSFETs
|
2009-01-16 |
| Know the link between the absolute maximum rating of gate-source voltage for a logic level power MOSFET and its reliability |
|
| True-shutdown circuit
|
2011-05-18 |
| Here's a circuit that achieves full shutdown for a MAX17112 converter by interposing an external MOSFET between input and output, controlled by an RS-232 transceiver |
|
| LP07 Series: Low dropout 3.0 volt linear regulator
|
2002-05-07 |
| This application note discusses the advantages of using Supertex part number LP0701N3, which is a very low gate threshold voltage p-channel MOSFET |
|
| Estimating junction temperature by top surface temperature in power MOSFETs
|
2010-03-02 |
| The thermal data provided on MOSFET datasheets is usually limited to thermal impedance between junction-to-lead and junction-to-ambient |
|
| NIS6111 BERS_ IC (better efficiency rectifier system) switching application note
|
2005-06-22 |
| This app note details NIS6111 BERS that consists of an integrated control IC and a low RDS (on) power MOSFET to replace the Schottky diode using hybrid technology |
|
| IRS21091 and IR21091 comparison
|
2010-06-10 |
| The IRS21091 is a high voltage, high speed power MOSFET and IGBT driver with dependent high- and low-side referenced output channels. This application note describes the differences between the IRS21091 and the IR21091 HVICs |
|
| IRS20955S and IRS20955S comparison
|
2010-06-09 |
| This application note describes the differences between the IRS20954S and IRS20955S, a high voltage, high speed MOSFET driver |
|
| Selecting transistors for hot-swap applications
|
2010-02-12 |
| This application note describes the steps required to properly choose a MOSFET that can meet the power dissipation requirements under all of the event areas |
|
| One-horsepower off-line brushless permanent magnet motor driver
|
2000-12-05 |
| This application note presents the design of a 1hp off-line brushless permanent magnet (BPM) motor drive board using opto-isolators and a special MOSFET turn-off IC for level translation |
|
| Computing power loss in synchronous buck converter
|
2011-11-17 |
| Learn about the MOSFET-related power losses in a synchronous buck converter |
|
| CCFL controller's soft-start profile
|
2009-01-22 |
| Read about the SSP feature for gradually ramping up the MOSFET duty cycles at the beginning of each lamp burst |
|
| Design and application guide of bootstrap circuit for high-voltage gate-drive IC
|
2009-11-26 |
| This application note aims to demonstrate a systematic approach to design high-performance bootstrap gate drive circuits for high-frequency, high-power and high-efficiency switching applications using a power MOSFET and IGBT |
|
| Active inrush current limiting using MOSFETs
|
2000-12-13 |
| nput filter design has been an integral part of power supply designs. |
|
| Evaluation board: Dual RGB controller
|
2008-10-17 |
| AAT4297 SmartSwitch is a device with six low side n-channel load switches, which are serially controlled. |
|
| Level shifting for I2C-bus design
|
2009-02-11 |
| Learn how to interface lower voltage circuits with existing 5 V devices using a level shifter. |
|
| FRFET in synchronous rectification
|
2009-11-02 |
| This application note shows potential failure modes of power MOSFETs and solutions for synchronous rectification in flyback topology. |
|
| Using LinkSwitch-XT
|
2009-04-20 |
| LinkSwitch-XT family is designed for low power adapters and chargers, as well as auxiliary supplies. |
|
Strange modes of transport and other "stuff"
|
|
|IIC-China
|
|
|Electronic Components|Computer Products|Trade Show Center
|Site Feedback|Site Map|Help|About Us|Contact Us|Terms of Use|Privacy Policy|Security Commitment