Interfacing the CS5525/6/9 to the 80C51
|
2001-04-18 |
| This application note details the interface of Crystal Semiconductor's CS5525/6/9 A/D converters to an 80C51 microcontroller |
|
| Keypad scan with PSoC
|
2009-03-24 |
| Know how the PSoC microcontroller's I/O structure can build a keypad scan routine that uses minimal RAM resources, and operates in a polled or interrupt mode |
|
| Programming the Siemens C167CR CAN interface: A real life case
|
2000-11-29 |
| This application note demonstrates programming the on-chip CAN interface of the Siemens C167CR microcontroller using the Keil C166 C Compiler and two Keil MCB167 evaluation boards |
|
| PCB layout guidelines for NXP MCUs in BGA packages
|
2011-07-13 |
| Read about a printed circuit board layout issues when using (L)(LF)(TF)BGA packages from the NXP LPC Microcontroller family |
|
| Applying I2C compatible temperature sensors in systems with slow clock edges
|
2011-05-27 |
| Find more about interfacing a microcontroller to one of the National Semiconductor digital temperature sensors |
|
| A method for compressing I2C scripts for the ADV74xx/ADV78xx
|
2010-01-15 |
| This application note describes a method for compressing large sets of I2C scripts for microcontroller platforms |
|
| Operation of AD converter (one-shot mode)
|
2003-09-19 |
| This application note shows the various AD signal conversion of the M16C/62A microcontroller in one-shot mode |
|
| Capacitive touch sensing using the LPC11xx
|
2011-03-07 |
| Here's a simple capacitive touch sensing method using an ADC input of the LPC11xx microcontroller |
|
| Operation of AD converter (one-shot mode, an external trigger)
|
2003-09-19 |
| This application note shows the various AD signal conversion of the M16C/62A microcontroller in one-shot mode with an external trigger |
|
| NiMH battery charger demonstration board through USB-based on the ST7FLIT15BY0
|
2009-09-15 |
| This application note describes a NiMH battery charger demonstration board used with a USB microcontroller |
|
| PLL jitter and its effects in the CAN protocol
|
2004-12-15 |
| This app note shows the influence of PLL jitter on Microchip's PIC18 microcontrollers, how it affects the overall clock of the microcontroller and how the combined effects of jitter and crystal drift are well below the CAN 2.0 specification |
|
| Interfacing Motorola's MC13190 2.4GHz Transceiver IC with HC08 Family MCUs
|
2003-05-26 |
| The Motorola MC13190 Transceiver and Motorola MC68HC908GR8 Microcontroller |
|
| EKG-based heart-rate monitor implementation using MSP430G2452 MCU
|
2011-05-27 |
| Read about thelow-cost heart-rate monitor solution based on the MSP430 LaunchPad Value Line Development Kit. |
|
| LCD driver specification
|
2010-04-21 |
| This application note describes a driver for twisted nematic displays (TN) or super twisted nematic displays (TNS). |
|
| Designing battery charger with wide-Vin
|
2011-10-25 |
| Read about a smart-battery charger reference design with a wide-input-voltage range. |
|
| MIPS32 M4K core shadow registers for MCU apps
|
2008-09-25 |
| The M4K core provides an elegant solution in the form of GPR shadow register support. |
|
| Use HT45R35 in touch switch extractor fan control apps
|
2009-06-09 |
| The application uses touch switches to replace the usual mechanical type of switches to control the extractor fan speed, timer function, illumination and LED indicator light function. |
|
| Destructive reset diagnostic routine for the MAXQ1103
|
2009-08-28 |
| This application note explores the various aspects of writing a diagnostic routine using the Rowley CrossWorks C compiler. |
|
| Port apps from Micro family to Flash MCUs
|
2009-01-09 |
| Read about these two MCU families and know how to upgrade from the high-speed to ultra-high-speed devices. |
|
| Sample code using Renesas Starter Kit for SH7239 MCU
|
2011-08-19 |
| Learn how to implement a sample project using the Renesas Starter Kit for SH7239 microcontrollers. |
|
| Using MAXQ2000 USB thumb evaluation kit
|
2009-01-16 |
| Know how to install and configure the kit's hardware and software, and to create and load applications executed by MAXQ2000. |
|
| Implementing wireless gas sensor function
|
2008-09-05 |
| Learn the steps to build a wireless gas sensor based on XE8805/05A capabilities. |
|
| Serial-to-Ethernet bridge using MCF51CN, FreeRTOS
|
2009-07-21 |
| This article describes a serial-to-Ethernet bridge using the MCF51CN128, the FreeRTOS v5.3.0 and the TCP/IP stack LwIP v1.3.0. |
|
| Designing with TRF7970A RFID/NFC reader IC
|
2011-11-15 |
| Know about several firmware design hints such as Missing IRQ; Lost IRQ; Wrong data due to "overshoots"; SO14443A decoder; and SPI with SS. |
|
| Use HT45R35 in touch switch fan apps
|
2009-06-02 |
| Read about HT45R35, a 12-touch MCU that can be used to replace the usual mechanical switch types. |
|
| Micron CellularRAM devices with Atmel MCU
|
2009-06-30 |
| Know the methods for connecting Micron CellularRAM devices to the Atmel AT91SAM9260. |
|
| Developing MQX applications
|
2009-07-16 |
| Learn how to start developing your first application on Freescale MQX RTOS quickly and easily. |
|
| Sleep mode in PSoC
|
2009-03-30 |
| Read about the sleep mode operation and other power savings techniques for PSoC. |
|
| Adding MCU into FPGA design
|
2010-11-30 |
| Know how to instantiate an MCU directly into the HDL and used it immediately in a standard FPGA design flow without special scripts or complicated steps. |
|
| EKG-based heart-rate monitor implementation on LaunchPad Value Line development kit
|
2011-04-05 |
| Learn about a low-cost heart-rate monitor solution based on the MSP430 LaunchPad Value Line Development Kit, which uses the MSP430G2xx MCU. |
|
Strange modes of transport and other "stuff"
|
|
|IIC-China
|
|
|Electronic Components|Computer Products|Trade Show Center
|Site Feedback|Site Map|Help|About Us|Contact Us|Terms of Use|Privacy Policy|Security Commitment