Importing a Warp post-fit netlist into Mentor Graphics' ModelSim
|
2001-03-30 |
| This application note is intended to assist Warp users in importing and simulating post-fit models into Mentor Graphics' ModelSim product. |
|
| Complex signal synthesis for real-time simulations
|
2001-09-25 |
| This application note presents an Acoustic Signal Generation System (ASGS) application in which DSPs are used to generate complex real-world signals as outputs. |
|
| Configuring OrCAD for schematic capture from MMICAD
|
2001-06-01 |
| This application note describes how to configure the OrCAD schematic capture module to link with the MMICAD simulator. |
|
| A user's guide to envelope following analysis
|
2001-06-06 |
| This application note describes how to use Envelope Following Analysis with SpectreRF. |
|
| Variational analysis using MMICAD
|
2001-06-01 |
| This application note describes how to use MMICAD in determining the sensitivity of designs to variations in a circuit parameter. |
|
| Maximizing your productivity
|
2001-06-01 |
| This application note details several of the user-friendly aspects of MMICAD that can improve the effectiveness of a designer's "CAD time" with a PC. |
|
| Parameter mode in MMICAD
|
2001-05-31 |
| This application discusses MMICAD's ability to sweep a parameter other than frequency. |
|
| TMS320C6410/C6413 DSP hardware design guide
|
2004-06-16 |
| The DSP Hardware Design Guide (DHDG) is a collection of the most commonly used technical documentation, models and FAQs for DSP hardware system designers. |
|
| TMS320C621x/TMS320C671x EDMA architecture
|
2004-06-16 |
| The enhanced DMA (EDMA) controller of the TMS320C621x/TMS320C671x device is a highly efficient data transfer engine. To maximize bandwidth, minimize transfer interference, and fully utilize the resources of the EDMA, it is crucial to understand the architecture of the engine. |
|
| Varactor SPICE models for RF VCO applications
|
2001-04-19 |
| This application note discusses a varactor equivalent circuit model for RF VCO applications. |
|
| Computer aided testing with MMICAD (Series #1: Setup and configuration)
|
2001-06-01 |
| This application note details the step-by-step configuration of MMICAD for Computer Aided Testing (CAT). |
|
| An interpolating delay line
|
2001-09-27 |
| This application note details the design of an interpolating digital delay line within SystemView operator library. |
|
| Designing Chebyshev band pass filters
|
2001-06-04 |
| This application note is intended to demonstrate the options available in FAISYN that relate to the design and specification of bandpass filters, and to re-acquaint the user with some of the general characteristics of Chebyshev filters. |
|
| Yield forecasting of active microwave devices
|
2001-06-01 |
| This application note describes how to perform yield forecasting of active microwave devices using the FETPro MESFET simulator in conjunction with MMICAD. |
|
| MC10X1189 I/O SPICE modeling kit
|
2000-12-06 |
| This application note provides the SPICE information necessary to accurately model system interconnect situations for designs that utilize the MC10SX1189 Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit. |
|
| Using MMICAD to design lumped element diplexers
|
2001-05-31 |
| This application note shows how FAISYN, MMICAD's filter synthesis module, can be used to help design a lumped element diplexer for a typical receive subsystem application. |
|
| ECLinPS circuit performance at non-standard VIH levels
|
2000-12-06 |
| This application note explains the consequences of driving an ECLinPS device with an input voltage HIGH level (VIH), which does not meet the maximum voltage specified in the ECLinPS data book. |
|
| MC10/100H600 translator family I/O SPICE modeling kit
|
2000-12-06 |
| This application note provides the SPICE information necessary to accurately model system interconnect situations for designs, which utilize the translator circuits of the MC10H600 family. |
|
| De-embedding using MMICAD
|
2001-05-31 |
| This application note discusses the special feature of MMICAD to de-embed networks. |
|
| Computer aided testing with MMICAD [Series #4: Automated data acquisition from an automatic network analyzer (ANA) and programmable power supplies]
|
2001-06-01 |
| This application note provides a step-by-step description of how to automate Computer Aided Testing (CAT) with MMICAD for acquisition of data. |
|
| Designing a Butterworth low pass filter
|
2001-06-04 |
| This application note discusses a Butterworth low pass filter design that illustrates the main features of the FAISYN filter synthesis program. |
|
| SPICE model eases feedback loop designs
|
2000-12-08 |
| This application note shows the benefits of using a SPICE model when designing SMPS. It also details the way to introduce various poles/zeroes combinations when implementing a shunt regulator. |
|
| Running MMICAD under Windows 3.1
|
2001-06-01 |
| This application note discusses how to operate MMICAD under Microsoft's Windows 3.1 environment. |
|
| Using MMICAD as a powerful general purpose mathematical solver (Example 1: Solving complex non-linear equations)
|
2001-05-31 |
| This application note discusses how to use MMICAD in solving complex nonlinear equations. |
|
| Using PSPICE to analyze performance of power MOSFETs in step-down, switching regulators employing synchronous rectification
|
2000-12-07 |
| This application note describes an easy method to analyze the performance of various power MOSFETs in step-down switching regulators using the PSPICE circuit analysis tool. |
|
| The TMS320C2xx sum-of-products methodology
|
2001-05-01 |
| This application note shows a series of programs transforming a normal sum-of-products routine to one using the MACD instruction. It uses TI's TMS320C2xx DSP series to program a fourth- or higher-order filter. |
|
| Monte Carlo yield analysis using MMICAD
|
2001-05-31 |
| This application note discusses the criteria needed to accomplish the forecasting of the production yield of a simulated circuit using MMICAD. |
|
| Using MMICAD as a powerful general purpose mathematical solver (Example 2: Curve fitting of data points by the least squares method)
|
2001-05-31 |
| This application note describes how MMICAD can perform curve fitting of data points by the least squares method. |
|
| Computer aided design of MMIC variable attenuators
|
2001-06-01 |
| This application note details the design, fabrication and testing of a high-performance, voltage-controlled MMIC attenuator that was designed using MMICAD. |
|
| Mobile fading channel model
|
2001-08-30 |
| This application note describes a multi-path Rayleigh fading mobile communication channel that can be used as the basis for testing the performance of various modulation techniques. |
|
Strange modes of transport and other "stuff"
|
|
|IIC-China
|
|
|Electronic Components|Computer Products|Trade Show Center
|Site Feedback|Site Map|Help|About Us|Contact Us|Terms of Use|Privacy Policy|Security Commitment