Using PortA on AN2131-DK001 Cypress USB Full-Speed Development Kit
|
2010-03-31 |
| This application note discusses how to transfer data over End-Point 2 then out EZ-USB PORTA using EZ-USB control panel |
|
USB carries 16bit voltage measurements
|
2009-08-19 |
| This application note presents a simple circuit that combines an ADC with a small USB module to make an 8-channel, 16bit measuring system. The MAX1168 ADC is featured |
|
Dynamic-link library for the CRX14 USB demo kit
|
2009-11-05 |
| This application note introduces the dynamic-link library (DLL) that provides the programming interface for the CRX14 USB reader demonstration kit |
|
USB BULK loopback with PSoC 3
|
2009-10-28 |
| This application note demonstrates how PSoC Creator simplifies the process of adding USB functionality to a project and performs both Out and In transfers |
|
Converting an EZ-USB application to EZ-USB FX
|
2001-03-22 |
| This application note addresses the differences between the EZ-USB and EZ-USB FX families of ICs, and outlines the steps required to make the conversion of an EZ-USB application to EZ-USB FX |
|
USB bootloader with shared USBExpress library
|
2008-07-07 |
| This application note describes the design of a USB bootloader built using the USBXpress Application Programming Interface |
|
Employ USB to RS-232 bridge
|
2009-04-02 |
| Learn how to implement a full featured USB to RS-232 bridge using PSoC |
|
Migrating applications to USB from RS-232 UART with minimal impact on PC software
|
2005-06-16 |
| This app note explains some background materials required for a better understanding of the serial emulation over USB method and to describe how to migrate an existing application to USB |
|
MSD using USB device firmware
|
2008-12-08 |
| Learn how to modify the Microchip USB device firmware framework to create a mass storage device |
|
USB driver customisation
|
2008-07-04 |
| This article outlines the steps to customise the Windows device driver installation with the USB Driver Installation Wizard |
|
Enhancing USB 2.0 switched-system response
|
2008-10-10 |
| This document describes how to implement an ultra-low-power, two-port USB 2.0 switch with the MAX4906EF |
|
Use a USB flash drive with an embedded host
|
2008-06-18 |
| Check how a data logger application runs on the Explorer 16 demo board with the USB PICtail Plus Daughter Board |
|
| USB HID bootloader for MCU
|
2011-08-29 |
| The bootloader is a small program put into the JM60 that complies with the USB HID class, which receives commands and data from the host to program and erase the flash memory |
|
Programming the EZ-USB I²C interface
|
2001-03-23 |
| This application note describes the programming of the I²C interface of the EZ-USB devices by dealing with the 8051 interface and presenting the assembly language code for 8051-byte read/write to the I²C bus |
|
Surge testing solid-state USB switches and other over-current protectors
|
2009-07-28 |
| Solid-state over-current protection ICs, such as USB and card-slot power switches, offer a simple and robust means of protecting pins at risk of overloads or shorts during a product's testing or from customer abuse |
|
EZ-USB IO ports
|
2001-03-23 |
| This application note explains the differences in the implementation of the I/O ports of the EZ-USB devices, and presents a code example and waveforms for using the "MOVX @R0" instruction |
|
SPI implementation using serial mode 0 on EZ-USB
|
2001-03-28 |
| This application note demonstrates how to implement SPI (Serial Peripheral Interface) using one of the EZ-USB UARTs in serial mode 0 |
|
Migrating from RS-232 to USB bridge specification (USB microcontrollers
|
2004-12-02 |
| This app note describes how to migrate from a RS-232 to the USB into the firmware using the Atmel USB RS232 virtual com port library |
|
CRC error recovery and USB retry protocol
|
2001-09-26 |
| This application note details how a peripheral CPU's firmware implements USB error recovery/retry protocol |
|
RX62N Group: USB peripheral communication device class driver
|
2011-05-23 |
| Here's an installation guide for the USB peripheral communication device class driver (PCDC), a sample program for USB interface control using the USB device |
|
USB device stack for PIC32 programmer's guide
|
2008-08-12 |
| Implement a function-specific driver that will interface with the Microchip USB peripheral firmware stack |
|
Automatic detection of USB port vs. wall adapter power
|
2008-07-28 |
| Implement a simple automatic power detection system for portable products that do not employ USB data controllers |
|
Integrating the DS1680 touschscreen controller within a USB device
|
2003-12-20 |
| This application note demonstrates how to use the DS1680 in a USB system to communicate the X-Y coordinates of the touchscreen and RTC information to the USB host |
|
| Scalar network analysis using U2000 USB power sensors
|
2012-01-05 |
| Find how to make accurate stimulus-response measurements using U2000 Series USB power sensors, ESG/MXG/PSG signal generators, broadband couplers, and power splitters |
|
Implementing a USB-to-Infrared (Philips RCMM) Dongle
|
2002-12-11 |
| Implementing a USB-to-Infrared (Philips RCMM) Dongle |
|
Hardware configurations for the i.MX family USB modules
|
2010-07-06 |
| This application note shows block diagrams for possible configurations for the i.MX family USB modules and also discusses some implementation issues |
|
USB printer class in MCU
|
2009-03-13 |
| USB Printer Class allows an embedded application to utilise a USB printer to provide hardcopy output for quick review and possible archival |
|
USB mass storage class on embedded host
|
2009-03-05 |
| One of the most common uses of USB embedded host functionality is to interface to mass storage devices |
|
UART serial interface through USB evaluation board
|
2005-06-09 |
| This app note discusses the operation and description of the UART serial interface through USB |
|
USB compliance checklist
|
2010-03-17 |
| This application note contains the USB checklist. This checklist supports a compliant full-speed USB device port, but does not support a low-speed USB device operation |
|