Improving pedometer performance with a single accelerometer
|
2008-10-17 |
| Read about the experiments attempting to gain decent performance from a pedometer that uses a single accelerometer |
|
| Using MMA745xL digital accelerometer
|
2009-05-29 |
| MMA745xL digital accelerometer is a 3mm x 5mm x 1mm product that can communicate using both I2C and SPI |
|
| Free-fall sensing for drop-force modeling using a Kionix MEMS tri-axis accelerometer
|
2009-10-12 |
| This application note describes how to use a Kionix MEMS tri-axis accelerometer as a free-fall sensor for drop force modeling applications |
|
| Tilt measurement using a low-g 3-axis accelerometer
|
2010-06-15 |
| This application note describes the methods and techniques for measuring tilt angles from a low-g 3-axis accelerometer |
|
| An inertial-grade, micromachined vibrating beam accelerometer
|
2002-05-10 |
| This application note describes the functions, performance and design of the Micromachined Vibrating Beam Accelerometer (MVBA |
|
| Model 3255 accelerometer
|
2002-05-14 |
| This application note illustrates the design and operation of the Model 3255, providing a better understanding of this "breakthrough" in sensing technology. |
|
| Getting started with the KXP84
|
2009-10-13 |
| This application note will help users quickly implement proof-of-concept designs using the KXP84 tri-axis accelerometer |
|
| Use MMA7660FC for orientation, shake, auto-wake/sleep, tap detection
|
2009-04-24 |
| The MMA7660FC is a ±1.5 g 3-axis accelerometer with digital output (I2C |
|
| Using accelerometers to realize rate information
|
2002-05-14 |
| This application note illustrates the features and functions of the Model 3255 accelerometer |
|
| Guide to MMA7660FC board mounting
|
2009-05-15 |
| Read about the suggested methods for minimising the stress on the package after board mount. |
|
| Guide to using RD3803MMA7660FC eval kit
|
2009-04-23 |
| Read about the setup and installation of the board and GUI, and the demos included in the GUI. |
|
| Transitioning from ADXL202 to ADXL213 or ADXL203
|
2010-03-11 |
| This application note describes some of these specification differences and outlines the main considerations to be taken into account when making the transition from ADXL202 to ADXL213 or ADXL203. |
|
| Low-power modes and auto-wake/sleep using the MMA8450Q
|
2010-04-27 |
| Accelerometers are commonly used in handheld electronics and/or battery operated electronic devices. Consumption of current in the entire system is a critical feature of the product design. |
|
| Design a proximity sensor-based RC
|
2009-02-05 |
| Know the system solution, hardware and software designs for a proximity sensor-based remote control. |
|
| Make wide temperature range, ultra low drift accelerometers using low-cost crystal ovens
|
2010-01-14 |
| Commercial crystal ovens have been used for many years to stabilise RF oscillators, which need to maintain a near constant frequency over wide temperature ranges. |
|
| MMA8450Q single/double and directional tap detection
|
2010-03-05 |
| The MMA8450Q has embedded single tap and double tap capabilities. Directional tap is not embedded in the device but directional tap can be accomplished using the embedded tap while flushing the FIFO after the event occurs to extract the direction information. |
|
| How many bits are enough?
|
2010-09-13 |
| This app note aims to educate customers on the details to understand more about their application, to help extract meaningful information from the data sheet and learn some of the techniques to get the most out of the sensor of the application. |
|
| Embedded orientation detection using the MMA8450Q
|
2010-03-04 |
| This application note targets the accelerometers' portrait/landscape orientation detection feature, which has become standard in many handheld electronic devices. |
|
| Using the 32 sample first in first out (FIFO) in the MMA8451Q
|
2010-09-10 |
| The MMA8451Q has a built-in 32 sample first in, first out buffer capable of storing 14bit data or 8bit data. |
|
| Solder, mount LGA sensor to PCB
|
2009-02-10 |
| Here's a guideline for effectively soldering and mounting MEMS based sensors which are sensitive to PCB reflow process. |
|
| Use ADC, QADC modules with ColdFire MCUs
|
2009-02-04 |
| Know how to use the ColdFire MCUs queued analogue-to-digital converter and the ColdFire MCU ADC. |
|
Strange modes of transport and other "stuff"
|
|
|IIC-China
|
|
|Electronic Components|Computer Products|Trade Show Center
|Site Feedback|Site Map|Help|About Us|Contact Us|Terms of Use|Privacy Policy|Security Commitment
