ISR programming using an embedded processor with Jam
|
2001-03-21 |
| This application note illustrates how to use the Jam Programming and Test Language to program ISR PLDs using an embedded processor |
|
Interfacing the TSB12LV41 1394 link layer controller to the TMS320AV7100 DSP embedded ARM processor
|
2001-04-25 |
| This application note describes the physical interconnections and timing requirements of the interface between the TMS320AV7100 DSP and the TSB12LV41 1394 Link Layer Controller. |
|
Reference system: OPB PCI using the ML410 embedded development platform
|
2007-04-13 |
| This application note explains the process of building a reference system for the On Chip Peripheral Bus Peripheral Component Interconnect (OPB PCI) core. The IBM PowerPC 405 (PPC405) Processor-based embedded system in the ML410 Embedded Development Platform.is used for the same |
|
| Reference system: OPB Ethernet MAC
|
2007-04-13 |
| This application note describes the reference system for enhancing all the main performance features of the On-Chip Peripheral Bus Ethernet Media Access Controller (OPB EMAC) processor IP core. The note illustrates the method of building an embedded MicroBlaze system using the OPB EMAC core |
|
Getting started with U-Boot on the ML300
|
2004-12-09 |
| This app note explains the steps necessary to run the open source firmware, Universal Bootloader (U-Boot), and to use it to boot Linux on the embedded IBM PowerPC 405(PPC405) processor available on Virtex-II Pro ML300 evaluation platforms |
|
PPC405 lockstep system on ML310
|
2004-12-09 |
| This app note discusses the implementation of a processor lockstep system using embedded PowerPC 405 (PPC405) processors in Xilinx Virtex-II Pro FPGAs, along with Xilinx software tools |
|
Embedded system example: Web server design using
|
2004-12-09 |
| This app note details an embedded system example design of a web server running on the MicroBlaze soft processor, designed using the embedded development kit (EDK |
|
PowerPC processor with floating point unit for Virtex-4 FX devices
|
2007-04-27 |
| Software applications can be accelerated by three to twenty times by connecting a floating point unit (FPU) to the PowerPC auxiliary processor unit (APU) interface. This application note provides a complete reference design for implementing a Virtex-4 FX PowerPC 405 system with the Xilinx FPU coprocessor. Created using the Xilinx Embedded Development Kit (EDK), the design also include a source code for a finite impulse response (FIR) filter along with a graphics utility for display output on a Windows-based PC |
|
Breaking the gigahertz speed barrier
|
2008-09-19 |
| This paper emphasises the collaborative efforts of MIPS Technologies and Synopsys that resulted in an automated RTL-to-GDSII flow. |
|
Interfacing TFT-LCD panels to ADSP-BF533 Blackfin processors via PPI
|
2004-12-13 |
| Interfacing TFT-LCD panels to ADSP-BF533 Blackfin processors via PPI |
|
Recommendations for OCE-Lite based debug in Super10 applications
|
2004-11-30 |
| Recommendations for OCE-Lite based debug in Super10 applications |
|
ISP1581 USB-to-ATAPI bridge
|
2003-05-27 |
| ISP1581 USB-to-ATAPI bridge |
|
| Understanding the CY2291, CY2292 and CY2295
|
2001-03-29 |
| Understanding the CY2291, CY2292 and CY2295 |
|
3D graphics using OpenGL ES
|
2009-01-22 |
| Learn how to produce graphics on the ADS512101 board using OpenGl ES. |
|
Utilising 36bit physical addressing in U-Boot and Linux
|
2010-03-30 |
| This application note explains how to enable and utilise 36bit physical addressing. |
|
Wind River Probe: a USB connectivity solution
|
2008-10-08 |
| Wind River Probe allows engineers to see what's happening in the system from board bring-up to production and test. |
|
Hardware interface guide for GPIO port expander
|
2009-04-06 |
| Read about the setup and hardware interfacing of the device to perform various functions power consumption. |
|
Highest-performance USB peripheral design with the NET2890
|
2001-09-26 |
| Highest-performance USB peripheral design with the NET2890 |
|
Using a microprocessor to configure FPGAs
|
2008-11-21 |
| Read about FPGA configuration via MCP and a system-level model for implementing an interface to configuration pins. |
|
Video streaming on multimedia apps processor
|
2009-05-06 |
| Know the steps for performing digital video streaming on the i.MX27 multimedia applications processor |
|
Low-power modes and auto-wake/sleep using the MMA8450Q
|
2010-04-27 |
| Accelerometers are commonly used in handheld electronics and/or battery operated electronic devices. Consumption of current in the entire system is a critical feature of the product design. |
|
Key architectural differences between the i.MX233 and i.MX25
|
2009-09-04 |
| This application note provides a comparison of the key architectural differences between the i.MX233 and i.MX25, Freescale's ARM-based 32bit application processors. |
|
Data encryption routines for the PIC18
|
2005-06-16 |
| Data encryption routines for the PIC18 |
|
TV chassis hardware design rules for ST92X195 microcontrollers
|
2004-11-30 |
| TV chassis hardware design rules for ST92X195 microcontrollers |
|
Using an eZ80 Flash Memory File System
|
2004-05-04 |
| Using an eZ80 Flash Memory File System |
|
Smart batteries and the Xicor X3100
|
2001-06-08 |
| Smart batteries and the Xicor X3100 |
|
Interface processor to PNAND processor port
|
2009-04-29 |
| Know how a system processor can interface to Astoria through the pseudo-NAND interface, and the considerations involved |
|
Using the 32 sample first in first out (FIFO) in the MMA8451Q
|
2010-09-10 |
| The MMA8451Q has a built-in 32 sample first in, first out buffer capable of storing 14bit data or 8bit data. |
|
Implementing an electronic watt-hour meter with MSP430FE42x(A)/FE42x2
|
2009-09-11 |
| This application note shows how to implement an electronic watt-hour meter with the MSP430FE42x(A)/FE42x2 devices. |
|
Abstraction layer eases I/O integration
|
2005-02-01 |
| Abstraction layer eases I/O integration |
|