Classic system partitioning in Bluetooth design
|
2001-11-01 |
| Classic system partitioning configures Bluetooth as a subsystem, while programmable logic adds another dimension to the system partitioning equation |
|
| Startup set to roll Bluetooth module-on-a-chip
|
2001-04-01 |
| A CMOS device said to pack nearly all the components needed to build a Bluetooth module has been launched by a year-old Silicon Valley startup |
|
| Integrate voice, stereo in Bluetooth devices
|
2007-03-23 |
| The requirement of Bluetooth music and voice to co-exist brings to the fore an array of challenges |
|
| Having efficient WiMAX, Bluetooth, WiFi in handsets
|
2007-06-18 |
| Read about the basics of WiMAX/Bluetooth coexistence and learn how to ensure the simultaneous and flawless interface operation with standard Bluetooth and WiFi |
|
| Application driven optimization of the next-generation Bluetooth solutions
|
2001-08-09 |
| This conference technical paper presents an overview of the first-generation Bluetooth solutions that target many applications with a generic product offering |
|
| Bluetooth basics
|
2000-07-02 |
| Since the release of the Bluetooth v.1.0 specification last year, the race has been on to provide Bluetooth-enabled products. Here is an overview of Bluetooth technology, its unique capabilities, and its advantages over competing wireless technologies. It's followed by an in-depth discussion of the Bluetooth link layer and Service Discovery Protocol |
|
| Near-field communications can speed up Bluetooth transactions
|
2006-04-05 |
| NFC links unravel Bluetooth's cumbersome pairing process |
|
| Designing Bluetooth for robust performance
|
2000-12-01 |
| The article outlines Bluetooth transceiver against crowded spectrum, jamming and signal strength problems to bring a robust model |
|
| Use Bluetooth to build an industrial wireless data logger
|
2008-09-15 |
| Here's a step-by-step guide through the design of an industrial data logger using wireless Bluetooth for data communications |
|
| A primer on Bluetooth Low Energy (Part 1
|
2011-08-08 |
| This two-part series gives an introduction to Bluetooth Low Energy (BLE) and its use in energy-constrained applications |
|
| Flexible System Architectures Required For Integrating Bluetooth Into Consumer Devices
|
2001-04-03 |
| This paper identifies and discusses the architectural design challenges faced when integrating Bluetooth functionality into a cellular-handset application |
|
| Bluetooth Enabled ASICs Versus Standard Bluetooth Chipsets
|
2001-07-02 |
| This paper discusses the pros and cons of using commercially available Bluetooth chipsets and integrating Bluetooth functionality into an existing ASIC |
|
| Anatomy of a Bluetooth protocol analyzer
|
2004-05-03 |
| Users look for various features of Bluetooth protocol analyzers such as real-time operation, portability, and enhanced support for low-power modes |
|
| Getting a grip on Bluetooth testing
|
2001-08-01 |
| The authors show how engineers can test their products in accordance with the standard tests developed by the Bluetooth Special Interest Group (SIG |
|
| Effective testing for Bluetooth transceiver ICs
|
2002-02-01 |
| This technical article describes how the RF front-end transceiver can effectively address the respective types of test parameters defined in Bluetooth technology |
|
| Finding the right tests for Bluetooth radio design
|
2003-04-01 |
| Bluetooth radio designs utilize a variety of system architectures; however, there are several issues that must be addressed in the course of developing a product, regardless of how the design is configured |
|
| Solutions in developing Bluetooth IP
|
2002-05-16 |
| This technical article discusses how to implement the Bluetooth technology in chip designs using platform-based techniques and higher abstraction |
|
| Designing with Bluetooth's EDR
|
2006-07-25 |
| Read about the design issues that engineers face when designing Bluetooth products, and understand the challenges of supporting Enhanced Data Rate (EDR) in existing systems |
|
| Solving Bluetooth, Wi-Fi coexistence challenges
|
2004-12-16 |
| Here are design practices and coordination mechanisms to ensure interoperability in co-located Bluetooth and WLAN devices |
|
| An Appreciation Of SOC On Bluetooth Headset
|
2001-03-29 |
| This paper introduces the fundamentals of Bluetooth headset, walks through the process of implementing a headset-specific SoC solution, and presents a usage model of the next-generation Bluetooth headset |
|
| A primer on Bluetooth Low Energy (Part 2
|
2011-09-21 |
| The second instalment of this two-part series tackles the Bluetooth software stack partition |
|
| Bluetooth drives wireless appliances
|
2001-02-01 |
| As a specification for low-cost, short-range radio links between mobile voice and computing devices, Bluetooth is anticipated to create a $500 million chip market by 2004 |
|
| Testing raises issues on high-speed Bluetooth
|
2008-03-18 |
| Read about the interference issues that will result between the 802.11 radio in the Bluetooth device and other IMT-2000 services operating in adjacent frequencies |
|
| Testing and qualifying a Bluetooth design
|
2005-08-01 |
| Avoid pitfalls in adding Bluetooth functionality to an existing design by minding these guidelines that help engineers prevent time-to-market delays |
|
| Bluetooth Architecture, Protocol And Applications
|
2001-04-02 |
| This paper examines the hardware architecture, software protocol and applications of a single-chip device that integrates Bluetooth radio and baseband, memory, a Harvard architecture RISC microcontroller and audio codec |
|
| Negotiate your way to interference-free Bluetooth
|
2003-05-02 |
| If Bluetooth is to be widely-accepted, it has to be robust and reliable; manufacturers must include CQDDR and reliable BER measurement schemes in their designs to ensure this |
|
| Reducing the energy of Bluetooth low energy
|
2011-05-30 |
| Here's an article that tackles Bluetooth Core Specification Version 4.0 and its key points |
|
| Optimize Bluetooth car kit design, implementation
|
2003-11-17 |
| There are many things to be considered in designing a Bluetooth car kit system - hardware and software must be upgraded and new profiles released by the Bluetooth SIG are needed |
|
| Implement solid security on Bluetooth devices
|
2008-12-11 |
| Read about the security features of individual Bluetooth components, types of security breaches, and solutions to them |
|
| Bluetooth headset design—not just about chips
|
2005-07-01 |
| Beyond cost, size, feature integration and power consumption, know what to consider when looking for a Bluetooth chips solution |
|
Strange modes of transport and other "stuff"
|
|
|IIC-China
|
|
|Electronic Components|Computer Products|Trade Show Center
|Site Feedback|Site Map|Help|About Us|Contact Us|Terms of Use|Privacy Policy|Security Commitment