Test plan for Agilent HDMI 1.4
|
2010-05-13 |
| Profiled in this technical paper are the high-speed source equipment, cable and the equipment's electrical tests, the protocol, audio and video tests, and subsequently the details of Ethernet and audio return channel tests (for these are all the additional functions |
|
LAN switching techniques using the PI5L100 & PI5L200
|
2000-11-28 |
| This application note describes how the PI5L100/200 LanSwitch devices can be used as replacements to mechanical reed relays in various applications such as 10BaseT, 100BaseVG-AnyLAN and Fast Ethernet switching techniques |
|
Implementing High-Speed Physical Interfaces And Internet Protocols In Software
|
2001-03-27 |
| This paper discusses the benefits of software physical interfaces and presents the implementation of 10Base-T (IEEE 802.3) Ethernet physical interface combined with TCP/IP protocol stack |
|
Detailing the Agilent HDMI 1.4 testing
|
2010-05-05 |
| Profiled in this technical paper are the high-speed source equipment, cable and the equipment's electrical tests, the protocol, audio and video tests, and subsequently the details of Ethernet and audio return channel tests (for these are all the additional functions |
|
Employing MDI testing with 10Gbase-T PHY
|
2010-02-23 |
| With the onset of volume 10Gbase-T production, challenges in manufacturing are being addressed to enable low-cost, high-quality 10GBase-T products. One of the bottlenecks in Ethernet switch production, however, is the need to perform Media-Dependent Interface (MDI) tests |
|
| Ringed bus technology puts twist on switching networks
|
2000-12-01 |
| Switch-fabric technology has existed for many years in mainstream applications embedded at the core of the network, such as ATM and Ethernet, in the form of proprietary ASICs designed by networking equipment vendors |
|
| Do DSP simulations in hardware
|
2007-03-21 |
| The System Generator for DSP Ethernet hardware co-simulation interfaces provide convenient, high-bandwidth solutions for simulating video and image processing applications on the Xilinx ML402 platform |
|
Optimising ECU parameters with XCP
|
2009-06-10 |
| XCP supports the CAN as well as other comm interfaces namely Ethernet, FlexRay, USB, RS232 and SPI/SCI |
|
Get ready to design power for security IP cameras
|
2007-05-23 |
| Here is what you need to know to create the appropriate power supplies for IP cameras utilising PoE technology. |
|
Transition to PBT smoothly, Part 2
|
2008-12-10 |
| This article explains how PBT can improve your networks and service resiliency. |
|
Understanding DDR-XAUI's feasibility
|
2008-12-19 |
| Learn why there is a strong business case for DDR-XAUI, a two lane 6.25Gbps XAUI in addition to XFI. |
|
Guide to embedded Wi-Fi design
|
2009-04-24 |
| Understand the peculiarities of Wi-Fi for embedded systems so that you can choose the best implementation based on your needs. |
|
Power sharing between isolated PoE channels
|
2007-06-04 |
| This article presents two schemes of power sharing on the secondary side between two isolated PoE channels. |
|
Guard PoE interfaces against transients
|
2009-06-10 |
| Know how to implement TVS diodes to safeguard PoE circuits from differential mode transients. |
|
PoE: Fundamentals, standards and implementations, Part 1
|
2008-10-29 |
| Read about this overview of power management issues in PoE technology. |
|
Get ready to design power for security IP cameras
|
2007-05-23 |
| The pending IEEE enhancements make a wide variety of video surveillance cameras feasible. Here's what you need to know to create the appropriate power supplies for PoE applications. |
|
| Packet rings aim at metro nets
|
2001-05-01 |
| Resilient packet ring (RPR) is a new technology that optimizes unique requirements of metro networks by defining a MAC with two network interfaces. |
|
Power considerations for VoIP
|
2008-10-13 |
| With the adoption of PoE, there is a change in the way we think about powering network components. |
|
Power sharing between isolated PoE channels
|
2007-06-04 |
| This article presents two schemes of power sharing on the secondary side between two isolated PoE channels. |
|
Multi-core SoCs challenge interconnects
|
2008-11-03 |
| This paper asks: Can existing standards-based interconnect protocols handle the new demands of multi-core SoCs? |
|
| Analysis: NPUs entice but fail to deliver
|
2001-01-01 |
| This news article describes the high demand performance users are looking for in network processors (NPUs). |
|
PoE evolution brings high power
|
2006-08-14 |
| Three techniques to increase power in Powered Devices (PD) are introduced in this article. |
|
| Packet switching right choice for wireless
|
2001-02-01 |
| The Internet switching model can cost two orders of magnitude less than conventional circuit architectures, making the economics of an IP network very attractive. |
|
Address test requirements for 40/100 GbE transceivers
|
2011-04-12 |
| Here's a review the updated optical and electrical measurements and testing approaches for this rapidly evolving field. |
|
How to build a 5.0 to 6.5-W PoE DC/DC converter
|
2007-07-18 |
| This article illustrates how to build a low-cost, high-efficiency PoE DC/DC converter with a power output of 5 to 6.5 watts. |
|
| FPGAs don remote reprogram habits
|
2001-05-01 |
| FPGAs are often used in embedded devices because they can be reprogrammed and one way of getting the new program to the device is by sending it through the net. |
|
| Employing Open Embedded to create Linux distributions
|
2011-08-08 |
| Learn what the key elements of the Open Embedded Linux (OE) build environment are, and understand how to use them to build and customise Linux distributions. |
|
Cut to the core of optimal MPLS router design
|
2003-04-16 |
| Cut to the core of optimal MPLS router design |
|
Denser, smaller, better 8bit devices emerge
|
2005-03-16 |
| Denser, smaller, better 8bit devices emerge |
|
| Position location strategies, applications (Part 2)
|
2011-11-04 |
| The second instalment of this series focuses on ad hoc and sensor network scenarios. |
|