CSP MOSFETs Offer Both Size And Performance Advantages
|
2001-03-30 |
| This paper describes Chip-Scale-Packaged (CSP) devices that enable the designer to reduce the amount of board space required to implement load management and battery protection circuits. |
|
Low-threshold MOSFETs for power-hungry portable devices
|
2005-09-29 |
| This article focuses on power MOSFETs to illustrate the impact of the latest silicon breakthroughs on increasing power requirements in portable devices. |
|
Interface logic technology will never die
|
2003-07-16 |
| Logic continues to have a bright future and it will always be regarded as the stop-gap solution when advanced ASICs or FPGAs fail to provide the best performance-to-cost ratio. |
|
Estimating Power IC contributions to your embedded design power budget
|
2007-11-22 |
| Here is a brief tutorial on gaining a better understanding of your embedded design's thermal constraints, especially as it relates to the diodes, MOSFETs and IGBTs in the power conversion circuitry. |
|
Applying a motor-controller IC for buck-boost conversion
|
2007-09-28 |
| This non-inverting buck-boost converter design will provide higher efficiency than traditional SEPIC or flyback topologies traditionally used for the task. |
|
Taking a practical look at current ratings
|
2010-04-06 |
| This article takes a close and practical look at the current rating. It focuses on MOSFETs in low and medium power packages, but the considerations can be applied to other technologies as well. |
|
Standard metal enables paradigm shift in ASIC technology
|
2005-08-16 |
| Deep-submicron design and manufacturing issues drive the critical need for a new design technology to replace standard cell |
|
| Rail-to-rail amp improves input offset accuracy
|
2007-04-18 |
| This article focuses on the development of the rail-to-rail amplifier's input stage and discusses in detail the input enhancement circuit that overcomes the deficiencies associated with rail-to-rail amplifiers. |
|
DC/DC integration cuts space, time
|
2005-08-01 |
| Integrating a DC/DC switching converter requires compact, multiple point-of-load power supplies and offers transient response to dynamic loads |
|
Power MOSFETs for smaller dc-dc converters
|
2005-01-17 |
| Developing power MOSFETs mounted in dc-dc converters minimizes power constraints as the speed of CPUs and memory installed in PCs and servers continue to integrate more sophisticated functions. |
|
Modeling less than the 0.13? technology
|
2002-04-16 |
| This technical article focuses on the critical problems involved in 0.13? technology and how innovative modeling can effect enhanced process variations on interconnect parasitics. |
|
Low-threshold MOSFETs for power-hungry portable devices
|
2005-09-29 |
| This article focuses on power MOSFETs to illustrate the impact of the latest silicon breakthroughs on increasing power requirements in portable devices. |
|
New standard in hot-swap reliability
|
2005-04-01 |
| Improve your devices' hot-swap controller to avoid the hassles of interrupted power supplies. Here's how. |
|
Audio power amplification goes beyond Class D
|
2004-11-16 |
| Switching amplifiers with wideband performance and low distortion require innovations beyond basic Class D circuit topology. |
|
Advanced power loss analysis using oscilloscope
|
2003-07-16 |
| The measurement of power loss at the switching device and inductor/transformer has becomes easier with modern oscilloscopes and power measurement software. |
|
Emerging trends in distributed power systems
|
2004-10-01 |
| The regulatory and end-application requirements are creating new challenges for the distributed power solutions. |
|
Estimating Power IC contributions to your embedded design power budget
|
2007-11-22 |
| Here is a brief tutorial on gaining a better understanding of your embedded design's thermal constraints, especially as it relates to the diodes, MOSFETs and IGBTs in the power conversion circuitry. |
|
Power management silicon in PoE apps
|
2005-04-18 |
| Power over Ethernet is a radical technology that is changing the way appliances are powered. Read on |
|
Package efficiency: A boost to power MOSFETs
|
2003-04-16 |
| DirectFET technology has radically reduced package resistance and inductance, and facilitated a large reduction in the thermal resistance. |
|
PC main power supply design
|
2002-04-08 |
| This article describes a new single ended forward converter solution. |
|
MCUs with PPG can function as PWM and DAC
|
2003-12-16 |
| MCUs that include built-in 16bit PPG timers can be configured in PWM mode to generate waveforms with varied pulse width at a constant period, in synchronization with a dedicated external or software trigger. |
|
Low-threshold MOSFETs can help alleviate power-hungry portable devices
|
2006-04-05 |
| Discover how MOSFETs can help portable devices achieve high-speed performance and improved power efficiency. |
|
Applying a motor-controller IC for buck-boost conversion
|
2007-09-28 |
| This non-inverting buck-boost converter design will provide higher efficiency than traditional SEPIC or flyback topologies traditionally used for the task. |
|
Outlining operation principles of PhotoMOS relays
|
2003-06-02 |
| The characteristics, architecture, and typical circuit of the PhotoMOS relay control circuit, as well as ways to ensure reliability in use are discussed in this article. |
|
Using cost-effective PWM controller for small power-offline apps
|
2004-12-16 |
| The article presents the development of a new PWM power-supply controller IC for universal input and low-power applications. |
|
Controlling "Inrush" Current For Load Switches In Battery Power Applications
|
2001-07-03 |
| This paper offers a solution to control the inrush current in load switch applications, and also compares two approaches to controlling the slew rate. |
|
Low cost power supplies using VIPer12A in non-isolated off-line applications
|
2002-04-08 |
| This article presents an overview of not isolated topologies and typical applications using the smart power integrated approach using VIPer12A. |
|