Murata’s OKDx-T/90 digital PoL converter has non-linear transient response that reduces Vout deviation due to large load changes.
By sampling the reflected isolated output voltage across the third winding on the power transformer, LT8315 requires no opto-isolator for regulation.
The LC717A30UJ uses mutual capacitance to detect capacitance changes down to femtofarad (fF) levels.
The module’s built-in data capture offers a turnkey solution as well as a platform for developing and deploying custom FPGA-processing IP.
TDK’s TFM160808ALC thin-film inductors have maximum DC resistance of 62mΩ that is 30% lower than existing TFM160808ALM.
Comparators operate in open loop configuration without any negative feedback.
The MOSFETs have been characterised for useful performance with linear energy transfer up to 90MeV/(mg/cm²).
The ZettaScaler-1.8 utilises Vicor converters to provide 48V to high density, high efficiency direct-to-PoL current multipliers.
Engineers know that a good set of power rails is like a good foundation for a structure: if it is not rock-solid, strange things can happen.
The controllers use integrated linear regulator, MOSFET drivers, 8-bit PIC microcontroller core, precision oscillator and analog control loops.