2017-02-03 - Mitsubishi Electric

Mitsubishi robot reduces generator inspection time

Mitsubishi Electric has developed a 19.9mm inspection robot that can inspect the gap between the rotor and the stator, reducing…

2017-01-30 - Gary Giust, Jayaprakash Balachandran, Bidyut Sen

Define serial-data jitter spec with clock analysis

You can automate the complexity of analysing reference clocks to custom or standard specifications to calculate their contribution to overall…

2017-01-30 - Gary Giust, Jayaprakash Balachandran, Bidyut Sen

Test serial-data clock jitter via LCC

When testing, use an oscilloscope with sufficient deep memory to capture the lowest-frequency expected to cause problems in the system.

2017-01-12 - Technavio

Bi-static sensors to win over monostatic radar

Detection range is the main specification for radar systems, and obtaining it requires high transmitter output power and highly sensitivity…

2016-12-14 - Synopsys

Synopsys VIP test suite targets high-res displays

Synopsys has introduced the Verification IP (VIP) and source code test suite for DisplayPort 1.4, which features DSC 1.2 and…

2016-12-09 - AdaCore

CWE-compatible static analysis tool detects buffer overflow

CodePeer is an Ada source code analyser that detects run-time and logic errors.

2016-11-16 - Cadence Design Systems

Cadence Modus test solution supports ARM MBIST interface

The solution utilises the ARM MBIST interface to reduce the impact of MBIST on critical timing paths to and from…

2016-11-14 - Martin Rowe

System tests up to PAM4 56Gbaud signals for 400GbE

The system consists of an MP1800A signal analyser, a G0374A 64Gbaud PAM4 2-bit DAC and an MP1862A 56Gbaud demultiplexer.

2016-11-11 - Graham Prophet

Test solution targets remote keyless entry systems

The fully automatic R&S TS7124AS shielded test box provides an interference-free environment for testing devices.

2016-10-28 - Cadence Design Systems

Samsung certifies Cadence tools for 10nm process

The Innovus Implementation System enables larger designs and reduced turnaround time while supporting Samsung’s 10LPP design requirement.